[PATCH 3/7] net, ipw2x00: remove redundant D0 power state set
DORMANTno replies
From: Yijing Wang <hidden>
Date: 2013-05-30 10:21:54
Also in:
linux-wireless, lkml
Subsystem:
networking drivers (wireless), the rest · Maintainers:
Johannes Berg, Linus Torvalds
Pci_enable_device() will set device power state to D0, so it's no need to do it again in ipw2100_pci_init_one(). Signed-off-by: Yijing Wang <redacted> --- drivers/net/wireless/ipw2x00/ipw2100.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 15920aa..f8ab193 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c@@ -6242,8 +6242,6 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, if ((val & 0x0000ff00) != 0) pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); - pci_set_power_state(pci_dev, PCI_D0); - if (!ipw2100_hw_is_adapter_in_system(dev)) { printk(KERN_WARNING DRV_NAME "Device not found via register read.\n");
--
1.7.1