[PATCH net-next] pch_gbe, ptp_pch: Fix the dependency direction between these drivers

In commit a24006ed12616bde1bbdb26868495906a212d8dc ('ptp: Enable clock
drivers along with associated net/PHY drivers') I wrongly made
PTP_1588_CLOCK_PCH depend on PCH_GBE.  The dependency is really the
other way around.  Therefore make PCH_GBE select PTP_1588_CLOCK_PCH
and remove the 'default y' from the latter.

Reported-by: Randy Dunlap <redacted>
Signed-off-by: Ben Hutchings <redacted>
---
 drivers/net/ethernet/oki-semi/pch_gbe/Kconfig |    1 +
 drivers/ptp/Kconfig                           |    2 --
 2 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
index 00bc4fc..34d05bf 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig

@@ -7,6 +7,7 @@ config PCH_GBE
 	depends on PCI
 	select NET_CORE
 	select MII
+	select PTP_1588_CLOCK_PCH
 	---help---
 	  This is a gigabit ethernet driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's

diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 70c5836..1ea6f1d 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig

@@ -72,9 +72,7 @@ config DP83640_PHY
 
 config PTP_1588_CLOCK_PCH
 	tristate "Intel PCH EG20T as PTP clock"
-	depends on PCH_GBE
 	select PTP_1588_CLOCK
-	default y
 	help
 	  This driver adds support for using the PCH EG20T as a PTP
 	  clock. The hardware supports time stamping of PTP packets

-- 
1.7.7.6


-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

On 11/16/2012 05:43 PM, Ben Hutchings wrote:

In commit a24006ed12616bde1bbdb26868495906a212d8dc ('ptp: Enable clock
drivers along with associated net/PHY drivers') I wrongly made
PTP_1588_CLOCK_PCH depend on PCH_GBE.  The dependency is really the
other way around.  Therefore make PCH_GBE select PTP_1588_CLOCK_PCH
and remove the 'default y' from the latter.

Reported-by: Randy Dunlap <redacted>
Signed-off-by: Ben Hutchings <redacted>

Acked-by: Randy Dunlap <redacted>

Thanks.

-- 
~Randy

From: Randy Dunlap <redacted>
Date: Fri, 16 Nov 2012 18:02:04 -0800

On 11/16/2012 05:43 PM, Ben Hutchings wrote:

quoted

In commit a24006ed12616bde1bbdb26868495906a212d8dc ('ptp: Enable clock
drivers along with associated net/PHY drivers') I wrongly made
PTP_1588_CLOCK_PCH depend on PCH_GBE.  The dependency is really the
other way around.  Therefore make PCH_GBE select PTP_1588_CLOCK_PCH
and remove the 'default y' from the latter.

Reported-by: Randy Dunlap <redacted>
Signed-off-by: Ben Hutchings <redacted>

Acked-by: Randy Dunlap <redacted>

Applied, thanks everyone.