[PATCH] net/ipv4/ipconfig: add device address to a KERN_INFO message

adds a "hwaddr" to the "IP-Config: Complete" KERN_INFO message
with the dev_addr of the device selected for auto configuration.

Signed-off-by: Claudio Fontana <redacted>
---
 net/ipv4/ipconfig.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 798358b..d763701 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c

@@ -1500,8 +1500,10 @@ static int __init ip_auto_config(void)
 	 * Clue in the operator.
 	 */
 	pr_info("IP-Config: Complete:\n");
-	pr_info("     device=%s, addr=%pI4, mask=%pI4, gw=%pI4\n",
-		ic_dev->name, &ic_myaddr, &ic_netmask, &ic_gateway);
+
+	pr_info("     device=%s, hwaddr=%*phC, ipaddr=%pI4, mask=%pI4, gw=%pI4\n",
+		ic_dev->name, ic_dev->addr_len, ic_dev->dev_addr,
+		&ic_myaddr, &ic_netmask, &ic_gateway);
 	pr_info("     host=%s, domain=%s, nis-domain=%s\n",
 		utsname()->nodename, ic_domain, utsname()->domainname);
 	pr_info("     bootserver=%pI4, rootserver=%pI4, rootpath=%s",

-- 
1.7.4.4

Hello,

while troubleshooting an issue I was having trying to mount the root
filesystem using nfsroot running on a software emulation (solved),
I found it useful to be able to see the selected device address in the
"IP-Config: Complete" message during boot as I was troubleshooting,
and I thought it might be good in general, and a good way to try to
submit my first patch :)

The patch is against latest mainline.

Thank you for your help and comments,

Claudio Fontana

From: Claudio Fontana <redacted>
Date: Thu, 25 Oct 2012 09:13:49 +0200

-	pr_info("     device=%s, addr=%pI4, mask=%pI4, gw=%pI4\n",
-		ic_dev->name, &ic_myaddr, &ic_netmask, &ic_gateway);
+
+ pr_info(" device=%s, hwaddr=%*phC, ipaddr=%pI4, mask=%pI4,
gw=%pI4\n",
+		ic_dev->name, ic_dev->addr_len, ic_dev->dev_addr,
+		&ic_myaddr, &ic_netmask, &ic_gateway);

Either you or your email client have destroyed the indentation
of these statements.