Re: [PATCH 2/2] Using LP firmware for taking advantage of the low-power capabilities.

2012/9/19 Jarl Friis [off-list ref]:

This is using the LP specific firmware to better take advantage of the
Low-Power capabilities.

Gosh... I just realized that the code I introduced is completely
untested. My hardware does not reach these pieces of code...

Sorry...

However the code seems natural (due to the firmware file name pattern)
for a PHY-LP hardware, that is a bcm4313 chip (pciid 14e4:4315).

So if there is anybody with such hardware... you might want to try it... Sorry.

Jarl
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

2012/9/19 Jarl Friis [off-list ref]:

2012/9/19 Jarl Friis [off-list ref]:

quoted

This is using the LP specific firmware to better take advantage of the
Low-Power capabilities.

Gosh... I just realized that the code I introduced is completely
untested. My hardware does not reach these pieces of code...

Sorry...

However the code seems natural (due to the firmware file name pattern)
for a PHY-LP hardware, that is a bcm4313 chip (pciid 14e4:4315).

Well, your BCM4322 is not LP-PHY card... does it really work better
after that change, and wakes up faster? ;)

BCM4313 is LCN-PHY, so your change won't affect it, not to mention it
is not supported by b43.

14e4:4315 is really BCM4312 (LP-PHY) and maybe could be affected by
this patch... but just in case of core 16. AFAIK our 14e4:4315 are
usually devices with core rev 15.

-- 
Rafał