[net 10/10] bnx2x: Clear MDC/MDIO warning message
From: Yaniv Rosner <hidden>
Date: 2012-04-04 09:40:08
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 2 +- 2 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 44556b7..4b05481 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c@@ -1874,7 +1874,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) * bnx2x_periodic_task(). */ smp_mb(); - queue_delayed_work(bnx2x_wq, &bp->period_task, 0); } else bp->port.pmf = 0;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 7e41682..ad95324 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c@@ -12205,10 +12205,10 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, * Hold it as vars low */ /* clear link led */ + bnx2x_set_mdio_clk(bp, params->chip_id, port); bnx2x_set_led(params, vars, LED_MODE_OFF, 0); if (reset_ext_phy) { - bnx2x_set_mdio_clk(bp, params->chip_id, port); for (phy_index = EXT_PHY1; phy_index < params->num_phys; phy_index++) { if (params->phy[phy_index].link_reset) {
--
1.7.7.1