[PATCH net] mlx4: Setting new port types after all interfaces unregistered

In port type change flow, need to set the new port types only after
all interfaces have finished the unregister process.
Otherwise, during unregister, one of the interfaces might issue a SET_PORT
command with wrong port types, it can cause bad FW behavior.

Signed-off-by: Yevgeny Petrilin <redacted>
---
 drivers/net/ethernet/mellanox/mlx4/main.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 5c655a2..32f8799 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c

@@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
 	for (port = 0; port <  dev->caps.num_ports; port++) {
 		/* Change the port type only if the new type is different
 		 * from the current, and not set to Auto */
-		if (port_types[port] != dev->caps.port_type[port + 1]) {
+		if (port_types[port] != dev->caps.port_type[port + 1])
 			change = 1;
-			dev->caps.port_type[port + 1] = port_types[port];
-		}
 	}
 	if (change) {
 		mlx4_unregister_device(dev);
 		for (port = 1; port <= dev->caps.num_ports; port++) {
 			mlx4_CLOSE_PORT(dev, port);
+			dev->caps.port_type[port + 1] = port_types[port];
 			err = mlx4_SET_PORT(dev, port);
 			if (err) {
 				mlx4_err(dev, "Failed to set port %d, "

-- 
1.5.4.3

From: Yevgeny Petrilin <redacted>
Date: Tue, 21 Feb 2012 15:41:07 +0200

In port type change flow, need to set the new port types only after
all interfaces have finished the unregister process.
Otherwise, during unregister, one of the interfaces might issue a SET_PORT
command with wrong port types, it can cause bad FW behavior.

Signed-off-by: Yevgeny Petrilin <redacted>

Applied.