[PATCH 1/2 net-next] cnic: set error flag when iSCSI connection fails

From: Jeffrey Huang <redacted>

to speed up error recovery due to SPQ failures.  The error flag will
expedite the recovery process by skipping the timeouts.

Signed-off-by: Jeffrey Huang <redacted>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
 drivers/net/ethernet/broadcom/cnic.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 7381460..e236560 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c

@@ -3927,6 +3927,8 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
 	case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
 		if (l4kcqe->status == 0)
 			set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
+		else if (l4kcqe->status == L4_KCQE_COMPLETION_STATUS_NIC_ERROR)
+			set_bit(SK_F_HW_ERR, &csk->flags);
 
 		smp_mb__before_clear_bit();
 		clear_bit(SK_F_OFFLD_SCHED, &csk->flags);

-- 
1.6.4.GIT

From: Eddie Wai <redacted>

This will support the new VLAN attribute in the iSCSI iface file.

Signed-off-by: Eddie Wai <redacted>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
 drivers/net/ethernet/broadcom/cnic.c    |    2 ++
 drivers/net/ethernet/broadcom/cnic_if.h |    4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index e236560..df42995 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c

@@ -380,6 +380,8 @@ static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 		if (cnic_in_use(csk) &&
 		    test_bit(SK_F_CONNECT_START, &csk->flags)) {
 
+			csk->vlan_id = path_resp->vlan_id;
+
 			memcpy(csk->ha, path_resp->mac_addr, 6);
 			if (test_bit(SK_F_IPV6, &csk->flags))
 				memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,

diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h
index 1517763..60deb84 100644
--- a/drivers/net/ethernet/broadcom/cnic_if.h
+++ b/drivers/net/ethernet/broadcom/cnic_if.h

@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.5.8"
-#define CNIC_MODULE_RELDATE	"Jan 3, 2012"
+#define CNIC_MODULE_VERSION	"2.5.9"
+#define CNIC_MODULE_RELDATE	"Feb 8, 2012"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1

-- 
1.6.4.GIT

From: "Michael Chan" <mchan@broadcom.com>
Date: Wed, 8 Feb 2012 19:33:56 -0800

From: Jeffrey Huang <redacted>

to speed up error recovery due to SPQ failures.  The error flag will
expedite the recovery process by skipping the timeouts.

Signed-off-by: Jeffrey Huang <redacted>
Signed-off-by: Michael Chan <mchan@broadcom.com>

Applied.

From: "Michael Chan" <mchan@broadcom.com>
Date: Wed, 8 Feb 2012 19:33:57 -0800

From: Eddie Wai <redacted>

This will support the new VLAN attribute in the iSCSI iface file.

Signed-off-by: Eddie Wai <redacted>
Signed-off-by: Michael Chan <mchan@broadcom.com>

Applied.