# Re: \[00/22\] Cyclades PC300 driver: summary of patch series

- From: Alan Cox \<hidden\>
- Date: 2012-01-30 10:27:20 
- List: netdev
- Page: https://ratatoskr.run/netdev/2012/01/3815219
- Thread: https://ratatoskr.run/netdev/2012/01/3815091/t.md

```text
On Sun, 29 Jan 2012 18:42:43 -0800
Andrea Shepard [ref] wrote:

> The Cyclades PC-300 is a line of PCI synchronous serial cards, which was
> produced in single and dual port models with either T1/E1 or V.35 ports.
> It used a Hitachi HD64572 (SCA-II) synchronous serial chip, and in the
> T1/E1 models an Infineon FALC-LH line interface/framing chip.  Copies
> of the hardware documentation may be found at [1].

The cleanup is better than it was but has lots left to sort. I think this
may actually be a good example of where the staging tree is useful as
it'll avoid this turning into a hundred cycles of adding another patch to
the enormous pile and can instead be done in step by step.

Alan
```