[PATCH net-next V1 18/21] mlx4_core: adjust catas operation for SRIOV mode
From: Yevgeny Petrilin <hidden>
Date: 2011-12-12 14:47:00
Also in:
linux-rdma
Subsystem:
mellanox mlx4 core vpi driver, networking drivers, the rest · Maintainers:
Tariq Toukan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Jack Morgenstein <redacted> When running in SRIOV mode, driver should not automatically start/stop the mlx4_core upon sensing an HCA internal error -- doing this disables/enables sriov, which will cause the hypervisor to hang if there are running VMs with attached VFs. In addition, on VMs the catas process should not run at all, since the HCA error buffer is not available to VMs in the BARs. Signed-off-by: Jack Morgenstein <redacted> --- drivers/net/ethernet/mellanox/mlx4/catas.c | 7 ++++++- drivers/net/ethernet/mellanox/mlx4/intf.c | 6 ++++-- 2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/catas.c b/drivers/net/ethernet/mellanox/mlx4/catas.c
index 45aea9c..915e947 100644
--- a/drivers/net/ethernet/mellanox/mlx4/catas.c
+++ b/drivers/net/ethernet/mellanox/mlx4/catas.c@@ -48,7 +48,8 @@ static struct work_struct catas_work; static int internal_err_reset = 1; module_param(internal_err_reset, int, 0644); MODULE_PARM_DESC(internal_err_reset, - "Reset device on internal errors if non-zero (default 1)"); + "Reset device on internal errors if non-zero" + " (default 1, in SRIOV mode default is 0)"); static void dump_err_buf(struct mlx4_dev *dev) {
@@ -116,6 +117,10 @@ void mlx4_start_catas_poll(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); phys_addr_t addr; + /*If we are in SRIOV the default of the module param must be 0*/ + if (mlx4_is_mfunc(dev)) + internal_err_reset = 0; + INIT_LIST_HEAD(&priv->catas_err.list); init_timer(&priv->catas_err.timer); priv->catas_err.map = NULL;
diff --git a/drivers/net/ethernet/mellanox/mlx4/intf.c b/drivers/net/ethernet/mellanox/mlx4/intf.c
index ca6feb5..b4e9f6f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/intf.c
+++ b/drivers/net/ethernet/mellanox/mlx4/intf.c@@ -142,7 +142,8 @@ int mlx4_register_device(struct mlx4_dev *dev) mlx4_add_device(intf, priv); mutex_unlock(&intf_mutex); - mlx4_start_catas_poll(dev); + if (!mlx4_is_slave(dev)) + mlx4_start_catas_poll(dev); return 0; }
@@ -152,7 +153,8 @@ void mlx4_unregister_device(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_interface *intf; - mlx4_stop_catas_poll(dev); + if (!mlx4_is_slave(dev)) + mlx4_stop_catas_poll(dev); mutex_lock(&intf_mutex); list_for_each_entry(intf, &intf_list, list)
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html