[PATCH net-next v2 5/6] tg3: Return flowctrl config through ethtool
From: Matt Carlson <hidden>
Date: 2011-12-09 00:39:55
Subsystem:
broadcom tg3 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Pavan Chebbi, Michael Chan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This patch changes the driver to return the flow control configuration rather than the flow control status through the ETHTOOL_GPAUSEPARAM ioctl. Signed-off-by: Matt Carlson <redacted> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <redacted> --- drivers/net/ethernet/broadcom/tg3.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 924dce5..28a959d 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c@@ -10596,12 +10596,12 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam epause->autoneg = !!tg3_flag(tp, PAUSE_AUTONEG); - if (tp->link_config.active_flowctrl & FLOW_CTRL_RX) + if (tp->link_config.flowctrl & FLOW_CTRL_RX) epause->rx_pause = 1; else epause->rx_pause = 0; - if (tp->link_config.active_flowctrl & FLOW_CTRL_TX) + if (tp->link_config.flowctrl & FLOW_CTRL_TX) epause->tx_pause = 1; else epause->tx_pause = 0;
--
1.7.3.4