Refer to the x25 packet layer's handling of incoming call user data,
namely at these two locations, in x25_rx_call_request and
x25_state1_machine:
https://github.com/mirrors/linux/blob/master/net/x25/af_x25.c#L1039
https://github.com/mirrors/linux/blob/master/net/x25/x25_in.c#L126
Call user data from an incoming message is copied into
(make)x25->calluserdata.cuddata buffers, which are 128 bytes long.
However, the length copied is based on the remaining message length,
and is not limited to the output buffer size. This allows a remote
attacker to overflow data onto the heap.
There is an appropriate constant defined for the length, but it
seemingly isn't used there:
https://github.com/mirrors/linux/blob/master/include/net/x25.h#L104
It seems this issue was noticed some time ago:
http://www.spinics.net/lists/linux-x25/msg00043.html
http://patchwork.ozlabs.org/patch/23917/
...however nothing was done about the bigger problem.
I have written a simple exploit for this vulnerability if it needs to
be posted, however I think the problem is pretty straightforward to
see as-is.
- Matthew Daley
Le lundi 03 octobre 2011 à 16:23 +1300, matt d a écrit :
Refer to the x25 packet layer's handling of incoming call user data,
namely at these two locations, in x25_rx_call_request and
x25_state1_machine:
https://github.com/mirrors/linux/blob/master/net/x25/af_x25.c#L1039
https://github.com/mirrors/linux/blob/master/net/x25/x25_in.c#L126
Call user data from an incoming message is copied into
(make)x25->calluserdata.cuddata buffers, which are 128 bytes long.
However, the length copied is based on the remaining message length,
and is not limited to the output buffer size. This allows a remote
attacker to overflow data onto the heap.
There is an appropriate constant defined for the length, but it
seemingly isn't used there:
https://github.com/mirrors/linux/blob/master/include/net/x25.h#L104
It seems this issue was noticed some time ago:
http://www.spinics.net/lists/linux-x25/msg00043.html
http://patchwork.ozlabs.org/patch/23917/
...however nothing was done about the bigger problem.
I have written a simple exploit for this vulnerability if it needs to
be posted, however I think the problem is pretty straightforward to
see as-is.
Please send a patch, it seems you have everything done to do it
properly ;)
x25_in.c looks straightforward.
with af_x25.c we might want to move the incoming call user data check
before the call accept block above.
Otherwise it could send call accept/call clear right next to each
other and it might get bad state
On Mon, Oct 3, 2011 at 4:45 PM, Eric Dumazet [off-list ref] wrote:
Le lundi 03 octobre 2011 à 16:23 +1300, matt d a écrit :
quoted
Refer to the x25 packet layer's handling of incoming call user data,
namely at these two locations, in x25_rx_call_request and
x25_state1_machine:
https://github.com/mirrors/linux/blob/master/net/x25/af_x25.c#L1039
https://github.com/mirrors/linux/blob/master/net/x25/x25_in.c#L126
Call user data from an incoming message is copied into
(make)x25->calluserdata.cuddata buffers, which are 128 bytes long.
However, the length copied is based on the remaining message length,
and is not limited to the output buffer size. This allows a remote
attacker to overflow data onto the heap.
There is an appropriate constant defined for the length, but it
seemingly isn't used there:
https://github.com/mirrors/linux/blob/master/include/net/x25.h#L104
It seems this issue was noticed some time ago:
http://www.spinics.net/lists/linux-x25/msg00043.html
http://patchwork.ozlabs.org/patch/23917/
...however nothing was done about the bigger problem.
I have written a simple exploit for this vulnerability if it needs to
be posted, however I think the problem is pretty straightforward to
see as-is.
Please send a patch, it seems you have everything done to do it
properly ;)
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html