[PATCH v4 0/3] add fec support for imx6q

STALE5501d SUPERSEDED

Revision v4 of 5 in this series.

4 messages, 1 author, 2011-09-22 · open the first message on its own page

[PATCH v4 0/3] add fec support for imx6q

From: Shawn Guo <hidden>
Date: 2011-09-22 05:10:15

This series adds imx6q enet support.  The imx6q enet is a derivative of
imx28 enet controller.  It fixed the frame endian issue found on imx28,
and added 1 Gbps support.

Changes since v3:
 * The minus one on phy_speed should happend before left shift.

Changes since v2:
 * Refine patch #1 to get fec_reset_phy() return void

Changes since v1:
 * Fix typo pointed out by Francois Romieu
 * Drop patch #3 in the v1
 * Rebase on net-next tree

Thanks.

Shawn Guo (3):
      net/fec: fec_reset_phy() does not need to always succeed
      net/fec: fix fec1 check in fec_enet_mii_init()
      net/fec: add imx6q enet support

 drivers/net/ethernet/freescale/Kconfig |    9 ++--
 drivers/net/ethernet/freescale/fec.c   |   79 +++++++++++++++++++++++---------
 2 files changed, 61 insertions(+), 27 deletions(-)

[PATCH v4 1/3] net/fec: fec_reset_phy() does not need to always succeed

From: Shawn Guo <hidden>
Date: 2011-09-22 05:10:16

FEC can work without a phy reset on some platforms, which means not
very platform necessarily have a phy-reset gpio encoded in device tree.
Even on the platforms that have the gpio, FEC can work without
resetting phy for some cases, e.g. boot loader has done that.

So it makes more sense to have the phy-reset-gpio request failure as
a debug message rather than a warning, and get fec_reset_phy() return
void since the caller does not check the return anyway.

Signed-off-by: Shawn Guo <redacted>
Acked-by: Wolfram Sang <redacted>
---
 drivers/net/ethernet/freescale/fec.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 158b82e..9c1d059 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c

@@ -1411,24 +1411,22 @@ static int __devinit fec_get_phy_mode_dt(struct platform_device *pdev)
 	return -ENODEV;
 }
 
-static int __devinit fec_reset_phy(struct platform_device *pdev)
+static void __devinit fec_reset_phy(struct platform_device *pdev)
 {
 	int err, phy_reset;
 	struct device_node *np = pdev->dev.of_node;
 
 	if (!np)
-		return -ENODEV;
+		return;
 
 	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
 	err = gpio_request_one(phy_reset, GPIOF_OUT_INIT_LOW, "phy-reset");
 	if (err) {
-		pr_warn("FEC: failed to get gpio phy-reset: %d\n", err);
-		return err;
+		pr_debug("FEC: failed to get gpio phy-reset: %d\n", err);
+		return;
 	}
 	msleep(1);
 	gpio_set_value(phy_reset, 1);
-
-	return 0;
 }
 #else /* CONFIG_OF */
 static inline int fec_get_phy_mode_dt(struct platform_device *pdev)

@@ -1436,13 +1434,12 @@ static inline int fec_get_phy_mode_dt(struct platform_device *pdev)
 	return -ENODEV;
 }
 
-static inline int fec_reset_phy(struct platform_device *pdev)
+static inline void fec_reset_phy(struct platform_device *pdev)
 {
 	/*
 	 * In case of platform probe, the reset has been done
 	 * by machine code.
 	 */
-	return 0;
 }
 #endif /* CONFIG_OF */

-- 
1.7.4.1

[PATCH v4 2/3] net/fec: fix fec1 check in fec_enet_mii_init()

From: Shawn Guo <hidden>
Date: 2011-09-22 05:10:17

In function fec_enet_mii_init(), it uses non-zero pdev->id as part
of the condition to check the second fec instance (fec1).  This works
before the driver supports device tree probe.  But in case of device
tree probe, pdev->id is -1 which is also non-zero, so the logic becomes
broken when device tree probe gets supported.

The patch change the logic to check "pdev->id > 0" as the part of the
condition for identifying fec1.

Signed-off-by: Shawn Guo <redacted>
Acked-by: Wolfram Sang <redacted>
---
 drivers/net/ethernet/freescale/fec.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 9c1d059..2bbe6a5 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c

@@ -996,7 +996,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	 * mdio interface in board design, and need to be configured by
 	 * fec0 mii_bus.
 	 */
-	if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id) {
+	if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) {
 		/* fec1 uses fec0 mii_bus */
 		fep->mii_bus = fec0_mii_bus;
 		return 0;

-- 
1.7.4.1

[PATCH v4 3/3] net/fec: add imx6q enet support

From: Shawn Guo <hidden>
Date: 2011-09-22 05:10:18

The imx6q enet is a derivative of imx28 enet controller.  It fixed
the frame endian issue found on imx28, and added 1 Gbps support.

It also fixes a typo on vendor name in Kconfig.

Signed-off-by: Shawn Guo <redacted>
---
 drivers/net/ethernet/freescale/Kconfig |    9 ++--
 drivers/net/ethernet/freescale/fec.c   |   64 +++++++++++++++++++++++++------
 2 files changed, 55 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 4dbe41f..1cf6716 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig

@@ -7,7 +7,7 @@ config NET_VENDOR_FREESCALE
 	default y
 	depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
 		   M523x || M527x || M5272 || M528x || M520x || M532x || \
-		   IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \
+		   ARCH_MXC || ARCH_MXS || \
 		   (PPC_MPC52xx && PPC_BESTCOMM)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

@@ -16,16 +16,15 @@ config NET_VENDOR_FREESCALE
 
 	  Note that the answer to this question doesn't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
-	  the questions about IBM devices. If you say Y, you will be asked for
-	  your specific card in the following questions.
+	  the questions about Freescale devices. If you say Y, you will be
+	  asked for your specific card in the following questions.
 
 if NET_VENDOR_FREESCALE
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
-		    IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC)
-	default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM
+		   ARCH_MXC || ARCH_MXS)
 	select PHYLIB
 	---help---
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 2bbe6a5..6a6a83d 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c

@@ -18,7 +18,7 @@
  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
  * Copyright (c) 2004-2006 Macq Electronique SA.
  *
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  */
 
 #include <linux/module.h>

@@ -72,6 +72,10 @@
 #define FEC_QUIRK_SWAP_FRAME		(1 << 1)
 /* Controller uses gasket */
 #define FEC_QUIRK_USE_GASKET		(1 << 2)
+/* Controller has GBIT support */
+#define FEC_QUIRK_HAS_GBIT		(1 << 3)
+/* Controller's phy_speed bit field need to minus one */
+#define FEC_QUIRK_PHY_SPEED_MINUS_ONE	(1 << 4)
 
 static struct platform_device_id fec_devtype[] = {
 	{

@@ -88,6 +92,10 @@ static struct platform_device_id fec_devtype[] = {
 		.name = "imx28-fec",
 		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
 	}, {
+		.name = "imx6q-fec",
+		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+			       FEC_QUIRK_PHY_SPEED_MINUS_ONE,
+	}, {
 		/* sentinel */
 	}
 };

@@ -97,12 +105,14 @@ enum imx_fec_type {
 	IMX25_FEC = 1, 	/* runs on i.mx25/50/53 */
 	IMX27_FEC,	/* runs on i.mx27/35/51 */
 	IMX28_FEC,
+	IMX6Q_FEC,
 };
 
 static const struct of_device_id fec_dt_ids[] = {
 	{ .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], },
 	{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
 	{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
+	{ .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fec_dt_ids);

@@ -373,6 +383,7 @@ fec_restart(struct net_device *ndev, int duplex)
 	int i;
 	u32 temp_mac[2];
 	u32 rcntl = OPT_FRAME_SIZE | 0x04;
+	u32 ecntl = 0x2; /* ETHEREN */
 
 	/* Whack a reset.  We should wait for this. */
 	writel(1, fep->hwp + FEC_ECNTRL);

@@ -442,18 +453,23 @@ fec_restart(struct net_device *ndev, int duplex)
 		/* Enable flow control and length check */
 		rcntl |= 0x40000000 | 0x00000020;
 
-		/* MII or RMII */
-		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
+		/* RGMII, RMII or MII */
+		if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
+			rcntl |= (1 << 6);
+		else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
 			rcntl |= (1 << 8);
 		else
 			rcntl &= ~(1 << 8);
 
-		/* 10M or 100M */
-		if (fep->phy_dev && fep->phy_dev->speed == SPEED_100)
-			rcntl &= ~(1 << 9);
-		else
-			rcntl |= (1 << 9);
-
+		/* 1G, 100M or 10M */
+		if (fep->phy_dev) {
+			if (fep->phy_dev->speed == SPEED_1000)
+				ecntl |= (1 << 5);
+			else if (fep->phy_dev->speed == SPEED_100)
+				rcntl &= ~(1 << 9);
+			else
+				rcntl |= (1 << 9);
+		}
 	} else {
 #ifdef FEC_MIIGSK_ENR
 		if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {

@@ -478,8 +494,15 @@ fec_restart(struct net_device *ndev, int duplex)
 	}
 	writel(rcntl, fep->hwp + FEC_R_CNTRL);
 
+	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
+		/* enable ENET endian swap */
+		ecntl |= (1 << 8);
+		/* enable ENET store and forward mode */
+		writel(1 << 8, fep->hwp + FEC_X_WMRK);
+	}
+
 	/* And last, enable the transmit and receive processing */
-	writel(2, fep->hwp + FEC_ECNTRL);
+	writel(ecntl, fep->hwp + FEC_ECNTRL);
 	writel(0, fep->hwp + FEC_R_DES_ACTIVE);
 
 	/* Enable interrupts we wish to service */

@@ -490,6 +513,8 @@ static void
 fec_stop(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 
 	/* We cannot expect a graceful transmit stop without link !!! */
 	if (fep->link) {

@@ -504,6 +529,10 @@ fec_stop(struct net_device *ndev)
 	udelay(10);
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 	writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
+
+	/* We have to keep ENET enabled to have MII interrupt stay working */
+	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
+		writel(2, fep->hwp + FEC_ECNTRL);
 }

@@ -918,6 +947,8 @@ static int fec_enet_mdio_reset(struct mii_bus *bus)
 static int fec_enet_mii_probe(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
+	const struct platform_device_id *id_entry =
+				platform_get_device_id(fep->pdev);
 	struct phy_device *phy_dev = NULL;
 	char mdio_bus_id[MII_BUS_ID_SIZE];
 	char phy_name[MII_BUS_ID_SIZE + 3];

@@ -949,14 +980,18 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 
 	snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
 	phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0,
-		PHY_INTERFACE_MODE_MII);
+			      fep->phy_interface);
 	if (IS_ERR(phy_dev)) {
 		printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name);
 		return PTR_ERR(phy_dev);
 	}
 
 	/* mask with MAC supported features */
-	phy_dev->supported &= PHY_BASIC_FEATURES;
+	if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT)
+		phy_dev->supported &= PHY_GBIT_FEATURES;
+	else
+		phy_dev->supported &= PHY_BASIC_FEATURES;
+
 	phy_dev->advertising = phy_dev->supported;
 
 	fep->phy_dev = phy_dev;

@@ -1007,7 +1042,10 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	/*
 	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
 	 */
-	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1;
+	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000);
+	if (id_entry->driver_data & FEC_QUIRK_PHY_SPEED_MINUS_ONE)
+		fep->phy_speed--;
+	fep->phy_speed <<= 1;
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
 	fep->mii_bus = mdiobus_alloc();

-- 
1.7.4.1

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help