[PATCH net 1/3] bnx2x: fix hw attention handling

@@ -4943,7 +4943,7 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
 	int igu_seg_id;
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
-	int reg_offset;
+	int reg_offset, reg_offset_en5;
 	u64 section;
 	int index;
 	struct hc_sp_status_block_data sp_sb_data;

@@ -4966,6 +4966,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
 
 	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
 			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+	reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+				 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
 	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
 		int sindex;
 		/* take care of sig[0]..sig[4] */

@@ -4980,7 +4982,7 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
 			 * and not 16 between the different groups
 			 */
 			bp->attn_group[index].sig[4] = REG_RD(bp,
-					reg_offset + 0x10 + 0x4*index);
+					reg_offset_en5 + 0x4*index);
 		else
 			bp->attn_group[index].sig[4] = 0;
 	}

@@ -1384,6 +1384,18 @@
    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
 #define MISC_REG_AEU_ENABLE4_PXP_0				 0xa108
 #define MISC_REG_AEU_ENABLE4_PXP_1				 0xa1a8
+/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0			 0xa688
+/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0			 0xa6b0
 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
    128 bit vector */
 #define MISC_REG_AEU_GENERAL_ATTN_0				 0xa000

@@ -7627,8 +7627,11 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
 		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		u8 *mac_addr = bp->dev->dev_addr;
 		u32 val;
+		u16 pmc;
+
 		/* The mac address is written to entries 1-4 to
-		   preserve entry 0 which is used by the PMF */
+		 * preserve entry 0 which is used by the PMF
+		 */
 		u8 entry = (BP_VN(bp) + 1)*8;
 
 		val = (mac_addr[0] << 8) | mac_addr[1];

@@ -7638,6 +7641,11 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
 		      (mac_addr[4] << 8) | mac_addr[5];
 		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
+		/* Enable the PME and clear the status */
+		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc);
+		pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
+		pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc);
+
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
 	} else

@@ -2120,6 +2120,7 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap)
 			break;
 		case DCB_CAP_ATTR_DCBX:
 			*cap = BNX2X_DCBX_CAPS;
+			break;
 		default:
 			rval = -EINVAL;
 			break;