From: Andrew Morton <akpm@linux-foundation.org> Date: 2011-09-01 23:40:46
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=42132
Summary: Support BCM5750M in tg3
Product: Drivers
Version: 2.5
Kernel Version: 3.0.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Network
AssignedTo: drivers_network@kernel-bugs.osdl.org
ReportedBy: stack.box@gmail.com
Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
I wish to have the support for this network card back again. Thanks!
From: Francesco Piccinno <hidden> Date: 2011-09-02 00:02:54
I know but apparently my laptop was lucky enough :)
Any chance to have the support for this card back?
On Fri, Sep 2, 2011 at 1:40 AM, Andrew Morton [off-list ref] wrote:
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
Summary: Support BCM5750M in tg3
Product: Drivers
Version: 2.5
Kernel Version: 3.0.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Network
AssignedTo: drivers_network@kernel-bugs.osdl.org
ReportedBy: stack.box@gmail.com
Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
From: Matt Carlson <hidden> Date: 2011-09-02 00:07:12
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
Summary: Support BCM5750M in tg3
Product: Drivers
Version: 2.5
Kernel Version: 3.0.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Network
AssignedTo: drivers_network@kernel-bugs.osdl.org
ReportedBy: stack.box@gmail.com
Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ?
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
Summary: Support BCM5750M in tg3
Product: Drivers
Version: 2.5
Kernel Version: 3.0.3
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Network
AssignedTo: drivers_network@kernel-bugs.osdl.org
ReportedBy: stack.box@gmail.com
Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. Can you post the full output of 'lspci -vvv -s 08:00.0' ?
From: Matt Carlson <hidden> Date: 2011-09-02 01:04:41
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. ??Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
?? ?? ?? ?? ?? ??Product: Drivers
?? ?? ?? ?? ?? ??Version: 2.5
?? ?? Kernel Version: 3.0.3
?? ?? ?? ?? ?? Platform: All
?? ?? ?? ?? OS/Version: Linux
?? ?? ?? ?? ?? ?? ?? Tree: Mainline
?? ?? ?? ?? ?? ?? Status: NEW
?? ?? ?? ?? ?? Severity: normal
?? ?? ?? ?? ?? Priority: P1
?? ?? ?? ?? ??Component: Network
?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
?? ?? ?? ?? ReportedBy: stack.box@gmail.com
?? ?? ?? ?? Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
From: Francesco Piccinno <hidden> Date: 2011-09-02 01:15:37
The only message I get regarding the firmware is the following:
[51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
Unfortunately I can not post the output of ethtool since the interface
is not available. Shall I recompile the tg3 module with the proper
patch and post the output?
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson [off-list ref] wrote:
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. ??Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
?? ?? ?? ?? ?? ??Product: Drivers
?? ?? ?? ?? ?? ??Version: 2.5
?? ?? Kernel Version: 3.0.3
?? ?? ?? ?? ?? Platform: All
?? ?? ?? ?? OS/Version: Linux
?? ?? ?? ?? ?? ?? ?? Tree: Mainline
?? ?? ?? ?? ?? ?? Status: NEW
?? ?? ?? ?? ?? Severity: normal
?? ?? ?? ?? ?? Priority: P1
?? ?? ?? ?? ??Component: Network
?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
?? ?? ?? ?? ReportedBy: stack.box@gmail.com
?? ?? ?? ?? Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
From: Matt Carlson <hidden> Date: 2011-09-02 01:25:32
Yes. Sorry. Please revert that patch. If you really had a bcm5750,
you'd need to revert another patch too, but let's see where we stand
before going down that road.
On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
The only message I get regarding the firmware is the following:
[51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
Unfortunately I can not post the output of ethtool since the interface
is not available. Shall I recompile the tg3 module with the proper
patch and post the output?
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson [off-list ref] wrote:
quoted
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. ??Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. ??Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
?? ?? ?? ?? ?? ??Product: Drivers
?? ?? ?? ?? ?? ??Version: 2.5
?? ?? Kernel Version: 3.0.3
?? ?? ?? ?? ?? Platform: All
?? ?? ?? ?? OS/Version: Linux
?? ?? ?? ?? ?? ?? ?? Tree: Mainline
?? ?? ?? ?? ?? ?? Status: NEW
?? ?? ?? ?? ?? Severity: normal
?? ?? ?? ?? ?? Priority: P1
?? ?? ?? ?? ??Component: Network
?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
?? ?? ?? ?? ReportedBy: stack.box@gmail.com
?? ?? ?? ?? Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
From: Francesco Piccinno <hidden> Date: 2011-09-02 09:20:51
The patch did not apply cleanly. BTW I have figured out an alternative
method. I modified by hand pci_ids.h and tg3.c files. The device seems
to work now.
The output of ethtool -i eth0 gives me:
driver: tg3
version: 3.119
firmware-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
Messages produced by the driver:
[ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 728.741498] tg3 0000:08:00.0: setting latency timer to 64
[ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201]
(PCI Express) MAC address 00:1b:38:38:c6:60
[ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 730.633610] tg3 0000:08:00.0: eth0: No firmware running
[ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson [off-list ref] wrote:
Yes. Sorry. Please revert that patch. If you really had a bcm5750,
you'd need to revert another patch too, but let's see where we stand
before going down that road.
On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
quoted
The only message I get regarding the firmware is the following:
[51503.038205] pci 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
Unfortunately I can not post the output of ethtool since the interface
is not available. Shall I recompile the tg3 module with the proper
patch and post the output?
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson [off-list ref] wrote:
quoted
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. ??Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. ??Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
?? ?? ?? ?? ?? ??Product: Drivers
?? ?? ?? ?? ?? ??Version: 2.5
?? ?? Kernel Version: 3.0.3
?? ?? ?? ?? ?? Platform: All
?? ?? ?? ?? OS/Version: Linux
?? ?? ?? ?? ?? ?? ?? Tree: Mainline
?? ?? ?? ?? ?? ?? Status: NEW
?? ?? ?? ?? ?? Severity: normal
?? ?? ?? ?? ?? Priority: P1
?? ?? ?? ?? ??Component: Network
?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
?? ?? ?? ?? ReportedBy: stack.box@gmail.com
?? ?? ?? ?? Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?
From: Matt Carlson <hidden> Date: 2011-09-02 17:43:34
The output shows that the device's firmware isn't running. Since the
firmware version also doesn't show up in the 'ethtool -i' output, it
might mean that firmware is completely missing.
You probably don't want to leave the device the way it is now. I'd
contact your vendor to see if you can get your firmware reprogrammed.
On Fri, Sep 02, 2011 at 02:20:10AM -0700, Francesco Piccinno wrote:
The patch did not apply cleanly. BTW I have figured out an alternative
method. I modified by hand pci_ids.h and tg3.c files. The device seems
to work now.
The output of ethtool -i eth0 gives me:
driver: tg3
version: 3.119
firmware-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
Messages produced by the driver:
[ 728.741487] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 728.741498] tg3 0000:08:00.0: setting latency timer to 64
[ 728.819963] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.879960] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.939957] tg3 0000:08:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware
update.
[ 728.942680] tg3 0000:08:00.0: eth0: Tigon3 [partno(none) rev 4201]
(PCI Express) MAC address 00:1b:38:38:c6:60
[ 728.942685] tg3 0000:08:00.0: eth0: attached PHY is 5750
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 728.942689] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[ 728.942692] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 728.949503] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 730.633610] tg3 0000:08:00.0: eth0: No firmware running
[ 730.650658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 811.811298] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 811.811306] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:25 AM, Matt Carlson [off-list ref] wrote:
quoted
Yes. ??Sorry. ??Please revert that patch. ??If you really had a bcm5750,
you'd need to revert another patch too, but let's see where we stand
before going down that road.
On Thu, Sep 01, 2011 at 06:14:57PM -0700, Francesco Piccinno wrote:
quoted
The only message I get regarding the firmware is the following:
[51503.038205] pci 0000:08:00.0: vpd r/w failed. ??This is likely a
firmware bug on this device. ??Contact the card vendor for a firmware
update.
Unfortunately I can not post the output of ethtool since the interface
is not available. Shall I recompile the tg3 module with the proper
patch and post the output?
--
Best regards,
Francesco Piccinno
On Fri, Sep 2, 2011 at 3:04 AM, Matt Carlson [off-list ref] wrote:
quoted
It's showing up on lspci as a PCIe device, so it can't be the 5750M.
The bcm5750M is a pci device.
I'm wondering if bootcode is failing. ??Do you see any messages in your
syslogs that say "No firmware running"?
Can you post the output of 'ethtool -i ethX'?
On Thu, Sep 01, 2011 at 05:48:50PM -0700, Francesco Piccinno wrote:
On Thu, Sep 01, 2011 at 04:40:11PM -0700, Andrew Morton wrote:
quoted
(switched to email. ??Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Wed, 31 Aug 2011 18:18:40 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
quoted
https://bugzilla.kernel.org/show_bug.cgi?id=42132
?? ?? ?? ?? ?? ??Summary: Support BCM5750M in tg3
?? ?? ?? ?? ?? ??Product: Drivers
?? ?? ?? ?? ?? ??Version: 2.5
?? ?? Kernel Version: 3.0.3
?? ?? ?? ?? ?? Platform: All
?? ?? ?? ?? OS/Version: Linux
?? ?? ?? ?? ?? ?? ?? Tree: Mainline
?? ?? ?? ?? ?? ?? Status: NEW
?? ?? ?? ?? ?? Severity: normal
?? ?? ?? ?? ?? Priority: P1
?? ?? ?? ?? ??Component: Network
?? ?? ?? ?? AssignedTo: drivers_network@kernel-bugs.osdl.org
?? ?? ?? ?? ReportedBy: stack.box@gmail.com
?? ?? ?? ?? Regression: Yes
I have a notebook (HP TC4400) which has a BCM5750 ethernet card inside. The
ouput of lspci is:
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5750M
Gigabit Ethernet [14e4:167c]
Commit 67b284d476bcb3d100e946da23d6cf9acfd0465c removed the support for this
device.
67b284d476bcb3d100 says "These devices were never released to the public".
quoted
I wish to have the support for this network card back again. Thanks!
oops ;)
Really? ??All the TC4400 documentation I find says it uses a bcm5753M on a
PCIe bus. ??Can you post the full output of 'lspci -vvv -s 08:00.0' ?