[PATCH 1/4][upstream] powerpc/p1010: Rearrange header file for FlexCAN

Subsystems: can network drivers, the rest

STALE5545d

2 messages, 2 authors, 2011-08-08 · open the first message on its own page

[PATCH 1/4][upstream] powerpc/p1010: Rearrange header file for FlexCAN

From: Bhaskar Upadhaya <hidden>
Date: 2011-08-08 15:00:05

- Rearrange header file so that it can be used by both of_ type
  and platform_ type architecture.
- Provide a common read and write interface for of_ type and platform_
  type architecture for accessing h/w registers.
Signed-off-by: Bhaskar Upadhaya <redacted>
---
 Based on http://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 Branch master

 include/linux/can/platform/flexcan.h |   65 ++++++++++++++++++++++++++++++++++
 1 files changed, 65 insertions(+), 0 deletions(-)
diff --git a/include/linux/can/platform/flexcan.h b/include/linux/can/platform/flexcan.h
index 72b713a..8458a87 100644
--- a/include/linux/can/platform/flexcan.h
+++ b/include/linux/can/platform/flexcan.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de>
+ * Copyright 2011 Freescale Semiconductor, Inc.
  *
  * This file is released under the GPLv2
  *
@@ -8,6 +9,27 @@
 #ifndef __CAN_PLATFORM_FLEXCAN_H
 #define __CAN_PLATFORM_FLEXCAN_H
 
+#include <linux/clk.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_OF
+#include<linux/of_platform.h>
+#else
+#include <linux/platform_device.h>
+#include <mach/clock.h>
+#endif
+
+#define DRV_NAME "flexcan"
+
+#ifdef __BIG_ENDIAN
+#define flexcan_read(x)	in_be32(x)
+#define flexcan_write(x, y) out_be32(y, x)
+#else
+#define flexcan_read(x)	readl(x)
+#define flexcan_write(x, y) writel(x, y)
+#endif
+
 /**
  * struct flexcan_platform_data - flex CAN controller platform data
  * @transceiver_enable:         - called to power on/off the transceiver
@@ -17,4 +39,47 @@ struct flexcan_platform_data {
 	void (*transceiver_switch)(int enable);
 };
 
+struct flexcan_interface {
+	int (*clk_enable) (struct clk *clk);
+	void (*clk_disable) (struct clk *clk);
+	void (*clk_put) (struct clk *clk);
+	unsigned long (*clk_get_rate) (struct clk *clk);
+	struct clk *(*clk_get) (struct device *dev, const char *id);
+};
+
+struct flexcan_resource {
+	u32 irq;
+	u64 addr;
+	u64 size;
+	const char *drv_name;
+};
+
+#ifdef CONFIG_OF
+struct clk {
+	unsigned long		rate;
+	void			*data;
+};
+#endif
+
+struct flexcan_priv {
+	struct can_priv can;
+	struct net_device *dev;
+	struct napi_struct napi;
+
+	void __iomem *base;
+	u32 reg_esr;
+	u32 reg_ctrl_default;
+
+	struct clk *clk;
+	struct flexcan_interface *flexcan_ops;
+	struct flexcan_platform_data *pdata;
+};
+
+int flexcan_dev_init(struct device *pdev, struct flexcan_resource
+			flexcan_res, struct flexcan_interface *flexcan_ops);
+
+void __devexit unregister_flexcandev(struct net_device *dev);
+
+void flexcan_reg_dump(struct net_device *dev);
+
 #endif /* __CAN_PLATFORM_FLEXCAN_H */
-- 
1.5.6.5

Re: [PATCH 1/4][upstream] powerpc/p1010: Rearrange header file for FlexCAN

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2011-08-08 15:08:18

On 08/08/2011 04:59 PM, Bhaskar Upadhaya wrote:
- Rearrange header file so that it can be used by both of_ type
  and platform_ type architecture.
- Provide a common read and write interface for of_ type and platform_
  type architecture for accessing h/w registers.
Signed-off-by: Bhaskar Upadhaya <redacted>
NACK - please have a look at Robin's patches. They are in a much better
shape.

cheers, Marc
quoted hunk
---
 Based on http://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 Branch master

 include/linux/can/platform/flexcan.h |   65 ++++++++++++++++++++++++++++++++++
 1 files changed, 65 insertions(+), 0 deletions(-)
diff --git a/include/linux/can/platform/flexcan.h b/include/linux/can/platform/flexcan.h
index 72b713a..8458a87 100644
--- a/include/linux/can/platform/flexcan.h
+++ b/include/linux/can/platform/flexcan.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de>
+ * Copyright 2011 Freescale Semiconductor, Inc.
  *
  * This file is released under the GPLv2
  *
@@ -8,6 +9,27 @@
 #ifndef __CAN_PLATFORM_FLEXCAN_H
 #define __CAN_PLATFORM_FLEXCAN_H
 
+#include <linux/clk.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_OF
+#include<linux/of_platform.h>
+#else
+#include <linux/platform_device.h>
+#include <mach/clock.h>
+#endif
+
+#define DRV_NAME "flexcan"
+
+#ifdef __BIG_ENDIAN
+#define flexcan_read(x)	in_be32(x)
+#define flexcan_write(x, y) out_be32(y, x)
+#else
+#define flexcan_read(x)	readl(x)
+#define flexcan_write(x, y) writel(x, y)
+#endif
+
 /**
  * struct flexcan_platform_data - flex CAN controller platform data
  * @transceiver_enable:         - called to power on/off the transceiver
@@ -17,4 +39,47 @@ struct flexcan_platform_data {
 	void (*transceiver_switch)(int enable);
 };
 
+struct flexcan_interface {
+	int (*clk_enable) (struct clk *clk);
+	void (*clk_disable) (struct clk *clk);
+	void (*clk_put) (struct clk *clk);
+	unsigned long (*clk_get_rate) (struct clk *clk);
+	struct clk *(*clk_get) (struct device *dev, const char *id);
+};
+
+struct flexcan_resource {
+	u32 irq;
+	u64 addr;
+	u64 size;
+	const char *drv_name;
+};
+
+#ifdef CONFIG_OF
+struct clk {
+	unsigned long		rate;
+	void			*data;
+};
+#endif
+
+struct flexcan_priv {
+	struct can_priv can;
+	struct net_device *dev;
+	struct napi_struct napi;
+
+	void __iomem *base;
+	u32 reg_esr;
+	u32 reg_ctrl_default;
+
+	struct clk *clk;
+	struct flexcan_interface *flexcan_ops;
+	struct flexcan_platform_data *pdata;
+};
+
+int flexcan_dev_init(struct device *pdev, struct flexcan_resource
+			flexcan_res, struct flexcan_interface *flexcan_ops);
+
+void __devexit unregister_flexcandev(struct net_device *dev);
+
+void flexcan_reg_dump(struct net_device *dev);
+
 #endif /* __CAN_PLATFORM_FLEXCAN_H */

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help