[PATCH net 09/10] bnx2x: Fix BCM578xx MAC test
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-08-03 09:00:39
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 5e6f351..01fb92c 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -11541,13 +11541,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params, * Set WC to loopback mode since link is required to provide clock * to the XMAC in 20G mode */ - if (vars->line_speed == SPEED_20000) { - bnx2x_set_aer_mmd(params, ¶ms->phy[0]); - bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); - params->phy[INT_PHY].config_loopback( + bnx2x_set_aer_mmd(params, ¶ms->phy[0]); + bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); + params->phy[INT_PHY].config_loopback( ¶ms->phy[INT_PHY], params); - } + bnx2x_xmac_enable(params, vars, 1); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); }
--
1.7.1