[PATCH net 08/10] bnx2x: Fix BCM54618se invalid link indication
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-08-03 09:00:12
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index cf8b8d1..5e6f351 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -10219,8 +10219,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, u32 cfg_pin; u8 port; - /* This works with E3 only, no need to check the chip - before determining the port. */ + /* + * In case of no EPIO routed to reset the GPHY, put it + * in low power mode. + */ + bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800); + /* + * This works with E3 only, no need to check the chip + * before determining the port. + */ port = params->port; cfg_pin = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region,
--
1.7.1