[PATCH net 06/10] bnx2x: Fix link issue with DAC over 578xx
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-08-03 09:00:04
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index d8f6eff..6a3fdf8 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -8029,6 +8029,9 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + /* Restart microcode to re-read the new mode */ + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_warpcore_reset_lane(bp, phy, 0); }
--
1.7.1