[PATCH net 04/10] bnx2x: Fix BCM578xx-B0 MDIO access
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-08-03 08:59:49
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 16 ++++++++++++++-- drivers/net/bnx2x/bnx2x_link.h | 1 + drivers/net/bnx2x/bnx2x_reg.h | 4 +++- 3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 8e68e15..45255bd 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -2953,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, u32 val; u16 i; int rc = 0; - + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); /* address */ val = ((phy->addr << 21) | (devad << 16) | reg | EMAC_MDIO_COMM_COMMAND_ADDRESS |
@@ -3007,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, } } + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); return rc; }
@@ -3016,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, u32 tmp; u8 i; int rc = 0; + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); /* address */
@@ -3069,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); } } - + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); return rc; }
@@ -11118,6 +11128,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, */ if (CHIP_REV(bp) == CHIP_REV_Ax) phy->flags |= FLAGS_MDC_MDIO_WA; + else + phy->flags |= FLAGS_MDC_MDIO_WA_B0; } else { switch (switch_cfg) { case SWITCH_CFG_1G:
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 7ee6b51..c12db6d 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h@@ -145,6 +145,7 @@ struct bnx2x_phy { #define FLAGS_SFP_NOT_APPROVED (1<<7) #define FLAGS_MDC_MDIO_WA (1<<8) #define FLAGS_DUMMY_READ (1<<9) +#define FLAGS_MDC_MDIO_WA_B0 (1<<10) #define FLAGS_TX_ERROR_CHECK (1<<12) /* preemphasis values for the rx side */
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index d84642a..27b5ecb 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h@@ -5624,8 +5624,9 @@ #define EMAC_MDIO_COMM_START_BUSY (1L<<29) #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) -#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16) #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 +#define EMAC_MDIO_STATUS_10MB (1L<<1) #define EMAC_MODE_25G_MODE (1L<<5) #define EMAC_MODE_HALF_DUPLEX (1L<<1) #define EMAC_MODE_PORT_GMII (2L<<2)
@@ -5636,6 +5637,7 @@ #define EMAC_REG_EMAC_MAC_MATCH 0x10 #define EMAC_REG_EMAC_MDIO_COMM 0xac #define EMAC_REG_EMAC_MDIO_MODE 0xb4 +#define EMAC_REG_EMAC_MDIO_STATUS 0xb0 #define EMAC_REG_EMAC_MODE 0x0 #define EMAC_REG_EMAC_RX_MODE 0xc8 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
--
1.7.1