[PATCH net 05/10] bnx2x: Fix LED behavior
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-08-03 08:59:47
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 24 +++++++++++++++++------- 1 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 45255bd..d8f6eff 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -5922,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params, tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - return rc; + /* + * return here without enabling traffic + * LED blink andsetting rate in ON mode. + * In oper mode, enabling LED blink + * and setting rate is needed. + */ + if (mode == LED_MODE_ON) + return rc; } - } else if (SINGLE_MEDIA_DIRECT(params) && - (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp))) { + } else if (SINGLE_MEDIA_DIRECT(params)) { /* * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - } else { + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp) || + (mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + else + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); + } else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); - } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */
--
1.7.1