Add support for D-Link 530T rev C1 (Kernel Bug 38862)

The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C,
unlike the previous revisions which were skge based.  It is probably
the same as the discontinued DGE-528T (0x4300) other than the PCI ID.

The PCI ID is 0x1186:0x4302.

Adding it to r8169.c where 0x1186:0x4300 is already found makes the card
be detected and work.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862

Signed-off-by: Len Sorensen <redacted>

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 7d9c650..c77286e 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c

@@ -239,6 +239,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8168), 0, 0, RTL_CFG_1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8169), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4300), 0, 0, RTL_CFG_0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4302), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AT,		0xc107), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(0x16ec,			0x0116), 0, 0, RTL_CFG_0 },
 	{ PCI_VENDOR_ID_LINKSYS,		0x1032,

-- 
Len Sorensen

On Thu, 28 Jul 2011 19:18:11 -0400
lsorense@csclub.uwaterloo.ca (Lennart Sorensen) wrote:

The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C,
unlike the previous revisions which were skge based.  It is probably
the same as the discontinued DGE-528T (0x4300) other than the PCI ID.

The PCI ID is 0x1186:0x4302.

Adding it to r8169.c where 0x1186:0x4300 is already found makes the card
be detected and work.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862

Signed-off-by: Len Sorensen <redacted>

Glad they at least changed the PCI-ID this time.
Other vendors have been known to do it wrong.

On Thu, Jul 28, 2011 at 04:34:34PM -0700, Stephen Hemminger wrote:

Glad they at least changed the PCI-ID this time.
Other vendors have been known to do it wrong.

No kidding.  Ick.

-- 
Len Sorensen