[PATCH 4/6] bnx2x: enable internal target-read for 57712 and up only
From: Dmitry Kravkov <hidden>
Date: 2011-07-24 14:11:03
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Shmulik Ravid <redacted> Signed-off-by: Dmitry Kravkov <redacted> Signed-off-by: Shmulik Ravid <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_main.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 9c146f7..9c62092 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c@@ -10242,11 +10242,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0); - /** + /* * Enable internal target-read (in case we are probed after PF FLR). - * Must be done prior to any BAR read access + * Must be done prior to any BAR read access. Only for 57712 and up */ - REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); + if (board_type != BCM57710 && + board_type != BCM57711 && + board_type != BCM57711E) + REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); /* Reset the load counter */ bnx2x_clear_load_cnt(bp);
--
1.7.2.2