[PATCH net-next 5/5] be2net: add code to display default value of tx rate for VFs
DORMANTno replies
From: Ajit Khaparde <hidden>
Date: 2011-04-18 22:31:08
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This change will allow the default value of tx rate to be displayed when ip link show is called on a PF interface. Signed-off-by: Ajit Khaparde <redacted> --- drivers/net/benet/be_main.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 94a9c4a..30fbb3b 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c@@ -3068,9 +3068,22 @@ static int __devinit be_probe(struct pci_dev *pdev, netif_carrier_off(netdev); if (be_physfn(adapter) && adapter->sriov_enabled) { + u8 mac_speed; + bool link_up; + u16 vf, lnk_speed; + status = be_vf_eth_addr_config(adapter); if (status) goto unreg_netdev; + + for (vf = 0; vf < num_vfs; vf++) { + status = be_cmd_link_status_query(adapter, &link_up, + &mac_speed, &lnk_speed, vf + 1); + if (!status) + adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10; + else + goto unreg_netdev; + } } dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
--
1.7.1