[PATCH 1/9 net-next-2.6] qlcnic: Make PCI info available to other function modes
DORMANTno replies
From: Anirban Chakraborty <hidden>
Date: 2011-04-01 04:33:57
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sony Chacko <redacted> Before this Fix PCI info was available only when multiple NIC functions were present on a port. Signed-off-by: Sony Chacko <redacted> Signed-off-by: Anirban Chakraborty <redacted> --- drivers/net/qlcnic/qlcnic_main.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e..d230fdd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c@@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) dev_info(dev, "failed to create crb sysfs entry\n"); if (device_create_bin_file(dev, &bin_attr_mem)) dev_info(dev, "failed to create mem sysfs entry\n"); + if (device_create_bin_file(dev, &bin_attr_pci_config)) + dev_info(dev, "failed to create pci config sysfs entry"); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; if (device_create_bin_file(dev, &bin_attr_esw_config)) dev_info(dev, "failed to create esw config sysfs entry"); if (adapter->op_mode != QLCNIC_MGMT_FUNC) return; - if (device_create_bin_file(dev, &bin_attr_pci_config)) - dev_info(dev, "failed to create pci config sysfs entry"); if (device_create_bin_file(dev, &bin_attr_npar_config)) dev_info(dev, "failed to create npar config sysfs entry"); if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_file(dev, &dev_attr_diag_mode); device_remove_bin_file(dev, &bin_attr_crb); device_remove_bin_file(dev, &bin_attr_mem); + device_remove_bin_file(dev, &bin_attr_pci_config); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; device_remove_bin_file(dev, &bin_attr_esw_config); if (adapter->op_mode != QLCNIC_MGMT_FUNC) return; - device_remove_bin_file(dev, &bin_attr_pci_config); device_remove_bin_file(dev, &bin_attr_npar_config); device_remove_bin_file(dev, &bin_attr_pm_config); device_remove_bin_file(dev, &bin_attr_esw_stats); --
1.7.4.1 This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.