[PATCHv2 NEXT 0/2]qlcnic: minor fixes
From: Amit Kumar Salecha <hidden>
Date: 2011-02-23 13:21:39
Hi Series v2 of minor fixes. Apply them on net-next. Now, patch 1 doesn't change module parameters name and its properties. -Amit
[PATCHv2 NEXT 0/2]qlcnic: minor fixes
4 messages, 2 authors, 2011-02-23 · open the first message on its own page
[PATCHv2 NEXT 1/2] qlcnic: fix checks for auto_fw_reset
From: Amit Kumar Salecha <hidden>
Date: 2011-02-23 13:21:39
o Remove checks of 1 for auto_fw_reset module parameter. auto_fw_reset is of type int and can have value > 1. o Remove unnecessary #define for 1 Signed-off-by: Amit Kumar Salecha <redacted> --- drivers/net/qlcnic/qlcnic.h | 1 - drivers/net/qlcnic/qlcnic_main.c | 9 ++++----- 2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 44e316f..fa7f794 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h@@ -867,7 +867,6 @@ struct qlcnic_nic_intr_coalesce { #define LINKEVENT_LINKSPEED_MBPS 0 #define LINKEVENT_LINKSPEED_ENCODED 1 -#define AUTO_FW_RESET_ENABLED 0x01 /* firmware response header: * 63:58 - message type * 57:56 - owner
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 37c04b4..4994b94 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c@@ -42,7 +42,7 @@ static int use_msi_x = 1; module_param(use_msi_x, int, 0444); MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); -static int auto_fw_reset = AUTO_FW_RESET_ENABLED; +static int auto_fw_reset = 1; module_param(auto_fw_reset, int, 0644); MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
@@ -2959,8 +2959,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) if (adapter->need_fw_reset) goto detach; - if (adapter->reset_context && - auto_fw_reset == AUTO_FW_RESET_ENABLED) { + if (adapter->reset_context && auto_fw_reset) { qlcnic_reset_hw_context(adapter); adapter->netdev->trans_start = jiffies; }
@@ -2973,7 +2972,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) qlcnic_dev_request_reset(adapter); - if ((auto_fw_reset == AUTO_FW_RESET_ENABLED)) + if (auto_fw_reset) clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state); dev_info(&netdev->dev, "firmware hang detected\n");
@@ -2982,7 +2981,7 @@ detach: adapter->dev_state = (state == QLCNIC_DEV_NEED_QUISCENT) ? state : QLCNIC_DEV_NEED_RESET; - if ((auto_fw_reset == AUTO_FW_RESET_ENABLED) && + if (auto_fw_reset && !test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) { qlcnic_schedule_work(adapter, qlcnic_detach_work, 0);
--
1.7.3.2
[PATCHv2 NEXT 2/2] qlcnic: Remove validation for max tx and max rx queues
From: Amit Kumar Salecha <hidden>
Date: 2011-02-23 13:21:40
From: Rajesh Borundia <redacted> Max rx queues and tx queues are governed by fimware. So driver should not validate these values. Signed-off-by: Rajesh Borundia <redacted> Signed-off-by: Amit Kumar Salecha <redacted> --- drivers/net/qlcnic/qlcnic.h | 4 ---- drivers/net/qlcnic/qlcnic_main.c | 6 ++---- 2 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index fa7f794..dc44564 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h@@ -1132,14 +1132,10 @@ struct qlcnic_eswitch { #define MAX_BW 100 /* % of link speed */ #define MAX_VLAN_ID 4095 #define MIN_VLAN_ID 2 -#define MAX_TX_QUEUES 1 -#define MAX_RX_QUEUES 4 #define DEFAULT_MAC_LEARN 1 #define IS_VALID_VLAN(vlan) (vlan >= MIN_VLAN_ID && vlan < MAX_VLAN_ID) #define IS_VALID_BW(bw) (bw <= MAX_BW) -#define IS_VALID_TX_QUEUES(que) (que > 0 && que <= MAX_TX_QUEUES) -#define IS_VALID_RX_QUEUES(que) (que > 0 && que <= MAX_RX_QUEUES) struct qlcnic_pci_func_cfg { u16 func_type;
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 4994b94..cd88c7e 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c@@ -3653,10 +3653,8 @@ validate_npar_config(struct qlcnic_adapter *adapter, if (adapter->npars[pci_func].type != QLCNIC_TYPE_NIC) return QL_STATUS_INVALID_PARAM; - if (!IS_VALID_BW(np_cfg[i].min_bw) - || !IS_VALID_BW(np_cfg[i].max_bw) - || !IS_VALID_RX_QUEUES(np_cfg[i].max_rx_queues) - || !IS_VALID_TX_QUEUES(np_cfg[i].max_tx_queues)) + if (!IS_VALID_BW(np_cfg[i].min_bw) || + !IS_VALID_BW(np_cfg[i].max_bw)) return QL_STATUS_INVALID_PARAM; } return 0;
--
1.7.3.2
Re: [PATCHv2 NEXT 0/2]qlcnic: minor fixes
From: David Miller <davem@davemloft.net>
Date: 2011-02-23 22:23:20
From: Amit Kumar Salecha <redacted> Date: Wed, 23 Feb 2011 05:21:23 -0800
Hi Series v2 of minor fixes. Apply them on net-next. Now, patch 1 doesn't change module parameters name and its properties.
Both applied, thanks.