[net-2.6 0/4][pull request] Intel Wired LAN Driver Updates

6 messages, 2 authors, 2011-02-17 · open the first message on its own page

[net-2.6 0/4][pull request] Intel Wired LAN Driver Updates

From: Jeff Kirsher <hidden>
Date: 2011-02-17 09:35:16

The following series contains two fixes for e1000e and ixgbe.

The following are changes since commit 6d90e8f45697c633f522269368297d7416fd8783:
  isdn: hisax: Use l2headersize() instead of dup (and buggy) func.

and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6 master

Amir Hanania (1):
  ixgbe: work around for DDP last buffer size

Andy Gospodarek (1):
  ixgbe: fix panic due to uninitialised pointer

Jesse Brandeburg (2):
  e1000e: check down flag in tasks
  e1000e: flush all writebacks before unload

 drivers/net/e1000e/netdev.c    |   52 ++++++++++++++++++++++++++++++++-------
 drivers/net/ixgbe/ixgbe_fcoe.c |   51 ++++++++++++++++++++++++++++++++++++++-
 drivers/net/ixgbe/ixgbe_fcoe.h |    2 +
 drivers/net/ixgbe/ixgbe_main.c |    6 +++-
 4 files changed, 98 insertions(+), 13 deletions(-)

-- 
1.7.4

[net-2.6 1/4] e1000e: check down flag in tasks

From: Jeff Kirsher <hidden>
Date: 2011-02-17 09:35:16

From: Jesse Brandeburg <redacted>

This change is part of a fix to avoid any tasks running while the driver is
exiting and deinitializing resources.

Signed-off-by: Jesse Brandeburg <redacted>
Tested-by: Jeff Pieper <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/e1000e/netdev.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3065870..174633c 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -937,6 +937,9 @@ static void e1000_print_hw_hang(struct work_struct *work)
 	u16 phy_status, phy_1000t_status, phy_ext_status;
 	u16 pci_status;
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1e_rphy(hw, PHY_STATUS, &phy_status);
 	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
 	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
@@ -1506,6 +1509,9 @@ static void e1000e_downshift_workaround(struct work_struct *work)
 	struct e1000_adapter *adapter = container_of(work,
 					struct e1000_adapter, downshift_task);
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
 }
 
@@ -3765,6 +3771,10 @@ static void e1000e_update_phy_task(struct work_struct *work)
 {
 	struct e1000_adapter *adapter = container_of(work,
 					struct e1000_adapter, update_phy_task);
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	e1000_get_phy_info(&adapter->hw);
 }
 
@@ -3775,6 +3785,10 @@ static void e1000e_update_phy_task(struct work_struct *work)
 static void e1000_update_phy_info(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	schedule_work(&adapter->update_phy_task);
 }
 
@@ -4149,6 +4163,9 @@ static void e1000_watchdog_task(struct work_struct *work)
 	u32 link, tctl;
 	int tx_pending = 0;
 
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	link = e1000e_has_link(adapter);
 	if ((netif_carrier_ok(netdev)) && link) {
 		/* Cancel scheduled suspend requests. */
@@ -4887,6 +4904,10 @@ static void e1000_reset_task(struct work_struct *work)
 	struct e1000_adapter *adapter;
 	adapter = container_of(work, struct e1000_adapter, reset_task);
 
+	/* don't run the task if already down */
+	if (test_bit(__E1000_DOWN, &adapter->state))
+		return;
+
 	if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
 	      (adapter->flags & FLAG_RX_RESTART_NOW))) {
 		e1000e_dump(adapter);
-- 
1.7.4

[net-2.6 3/4] ixgbe: fix panic due to uninitialised pointer

From: Jeff Kirsher <hidden>
Date: 2011-02-17 09:35:17

From: Andy Gospodarek <andy@greyhouse.net>

Systems containing an 82599EB and running a backported driver from
upstream were panicing on boot.  It turns out hw->mac.ops.setup_sfp is
only set for 82599, so one should check to be sure that pointer is set
before continuing in ixgbe_sfp_config_module_task.  I verified by
inspection that the upstream driver has the same issue and also added a
check before the call in ixgbe_sfp_link_config.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_main.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index fbae703..30f9ccf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3728,7 +3728,8 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
 			 * We need to try and force an autonegotiation
 			 * session, then bring up link.
 			 */
-			hw->mac.ops.setup_sfp(hw);
+			if (hw->mac.ops.setup_sfp)
+				hw->mac.ops.setup_sfp(hw);
 			if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
 				schedule_work(&adapter->multispeed_fiber_task);
 		} else {
@@ -5968,7 +5969,8 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 		unregister_netdev(adapter->netdev);
 		return;
 	}
-	hw->mac.ops.setup_sfp(hw);
+	if (hw->mac.ops.setup_sfp)
+		hw->mac.ops.setup_sfp(hw);
 
 	if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
 		/* This will also work for DA Twinax connections */
-- 
1.7.4

[net-2.6 2/4] e1000e: flush all writebacks before unload

From: Jeff Kirsher <hidden>
Date: 2011-02-17 09:35:17

From: Jesse Brandeburg <redacted>

The driver was not flushing all writebacks before unloading, possibly
causing memory to be written by the hardware after the driver had
reinitialized the rings.

This adds missing functionality to flush any pending writebacks and is
called in all spots where descriptors should be completed before the driver
begins processing.

Signed-off-by: Jesse Brandeburg <redacted>
Reviewed-by: Bruce Allan <redacted>
Tested-by: Jeff Pieper <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/e1000e/netdev.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 174633c..3fa110d 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3344,6 +3344,21 @@ int e1000e_up(struct e1000_adapter *adapter)
 	return 0;
 }
 
+static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	if (!(adapter->flags2 & FLAG2_DMA_BURST))
+		return;
+
+	/* flush pending descriptor writebacks to memory */
+	ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+	ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+	/* execute the writes immediately */
+	e1e_flush();
+}
+
 void e1000e_down(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -3383,6 +3398,9 @@ void e1000e_down(struct e1000_adapter *adapter)
 
 	if (!pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
+
+	e1000e_flush_descriptors(adapter);
+
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
@@ -4354,19 +4372,12 @@ link_up:
 	else
 		ew32(ICS, E1000_ICS_RXDMT0);
 
+	/* flush pending descriptors to memory before detecting Tx hang */
+	e1000e_flush_descriptors(adapter);
+
 	/* Force detection of hung controller every watchdog period */
 	adapter->detect_tx_hung = 1;
 
-	/* flush partial descriptors to memory before detecting Tx hang */
-	if (adapter->flags2 & FLAG2_DMA_BURST) {
-		ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
-		ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
-		/*
-		 * no need to flush the writes because the timeout code does
-		 * an er32 first thing
-		 */
-	}
-
 	/*
 	 * With 82571 controllers, LAA may be overwritten due to controller
 	 * reset from the other port. Set the appropriate LAA in RAR[0]
-- 
1.7.4

[net-2.6 4/4] ixgbe: work around for DDP last buffer size

From: Jeff Kirsher <hidden>
Date: 2011-02-17 09:35:18

From: Amir Hanania <redacted>

A HW limitation was recently discovered where the last buffer in a DDP offload
cannot be a full buffer size in length. Fix the issue with a work around by
adding another buffer with size = 1.

Signed-off-by: Amir Hanania <redacted>
Tested-by: Ross Brattain <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_fcoe.c |   51 +++++++++++++++++++++++++++++++++++++++-
 drivers/net/ixgbe/ixgbe_fcoe.h |    2 +
 2 files changed, 52 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 8753980..c54a882 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -159,7 +159,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	struct scatterlist *sg;
 	unsigned int i, j, dmacount;
 	unsigned int len;
-	static const unsigned int bufflen = 4096;
+	static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
 	unsigned int firstoff = 0;
 	unsigned int lastsize;
 	unsigned int thisoff = 0;
@@ -254,6 +254,24 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	/* only the last buffer may have non-full bufflen */
 	lastsize = thisoff + thislen;
 
+	/*
+	 * lastsize can not be buffer len.
+	 * If it is then adding another buffer with lastsize = 1.
+	 */
+	if (lastsize == bufflen) {
+		if (j >= IXGBE_BUFFCNT_MAX) {
+			e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+				"not enough user buffers. We need an extra "
+				"buffer because lastsize is bufflen.\n",
+				xid, i, j, dmacount, (u64)addr);
+			goto out_noddp_free;
+		}
+
+		ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
+		j++;
+		lastsize = 1;
+	}
+
 	fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
 	fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
 	fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
@@ -532,6 +550,24 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 			e_err(drv, "failed to allocated FCoE DDP pool\n");
 
 		spin_lock_init(&fcoe->lock);
+
+		/* Extra buffer to be shared by all DDPs for HW work around */
+		fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+		if (fcoe->extra_ddp_buffer == NULL) {
+			e_err(drv, "failed to allocated extra DDP buffer\n");
+			goto out_extra_ddp_buffer_alloc;
+		}
+
+		fcoe->extra_ddp_buffer_dma =
+			dma_map_single(&adapter->pdev->dev,
+				       fcoe->extra_ddp_buffer,
+				       IXGBE_FCBUFF_MIN,
+				       DMA_FROM_DEVICE);
+		if (dma_mapping_error(&adapter->pdev->dev,
+				      fcoe->extra_ddp_buffer_dma)) {
+			e_err(drv, "failed to map extra DDP buffer\n");
+			goto out_extra_ddp_buffer_dma;
+		}
 	}
 
 	/* Enable L2 eth type filter for FCoE */
@@ -581,6 +617,14 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 		}
 	}
 #endif
+
+	return;
+
+out_extra_ddp_buffer_dma:
+	kfree(fcoe->extra_ddp_buffer);
+out_extra_ddp_buffer_alloc:
+	pci_pool_destroy(fcoe->pool);
+	fcoe->pool = NULL;
 }
 
 /**
@@ -600,6 +644,11 @@ void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
 	if (fcoe->pool) {
 		for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
 			ixgbe_fcoe_ddp_put(adapter->netdev, i);
+		dma_unmap_single(&adapter->pdev->dev,
+				 fcoe->extra_ddp_buffer_dma,
+				 IXGBE_FCBUFF_MIN,
+				 DMA_FROM_DEVICE);
+		kfree(fcoe->extra_ddp_buffer);
 		pci_pool_destroy(fcoe->pool);
 		fcoe->pool = NULL;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index 4bc2c55..65cc8fb 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -70,6 +70,8 @@ struct ixgbe_fcoe {
 	spinlock_t lock;
 	struct pci_pool *pool;
 	struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+	unsigned char *extra_ddp_buffer;
+	dma_addr_t extra_ddp_buffer_dma;
 };
 
 #endif /* _IXGBE_FCOE_H */
-- 
1.7.4

Re: [net-2.6 0/4][pull request] Intel Wired LAN Driver Updates

From: David Miller <davem@davemloft.net>
Date: 2011-02-17 20:44:04

From: Jeff Kirsher <redacted>
Date: Thu, 17 Feb 2011 01:35:06 -0800
The following series contains two fixes for e1000e and ixgbe.

The following are changes since commit 6d90e8f45697c633f522269368297d7416fd8783:
  isdn: hisax: Use l2headersize() instead of dup (and buggy) func.

and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6 master
Pulled, thanks Jeff.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help