[PATCH] [RFC] ath9k: Fix reporting of RX STBC streams to userspace

While the driver reports

         ath: TX streams 2, RX streams: 2

in the kernel log (with ATH_DBG_CONFIG set in the debug module
parameter), "iw list" only reported

[...]
         Capabilities: 0x12ce
                 HT20/HT40
                 SM Power Save disabled
                 RX HT40 SGI
                 TX STBC
                 RX STBC 1-streams
[...]

The driver seems to set the value as flag while the iw tool interprets
it as number. This patch fixes that.

Signed-off-by: Bernhard Walle<redacted>
---
  drivers/net/wireless/ath/ath9k/init.c |   12 ++++++------
  1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 639dc93..935b6c3 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c

@@ -215,17 +215,17 @@ static void setup_ht_cap(struct ath_softc *sc,
  	else
  		max_streams = 2;

-	if (AR_SREV_9280_20_OR_LATER(ah)) {
-		if (max_streams>= 2)
-			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
-		ht_info->cap |= (1<<  IEEE80211_HT_CAP_RX_STBC_SHIFT);
-	}
-
  	/* set up supported mcs set */
  	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
  	tx_streams = ath9k_cmn_count_streams(common->tx_chainmask, max_streams);
  	rx_streams = ath9k_cmn_count_streams(common->rx_chainmask, max_streams);

+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		if (max_streams>= 2)
+			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
+		ht_info->cap |= (rx_streams<<  IEEE80211_HT_CAP_RX_STBC_SHIFT);
+	}
+