[net-2.6 v2 0/7][pull request] Intel Wired LAN Driver Updates

The following series contains the addition of a PHY id for e1000
and several ixgbe fixes.

v2- fixed tab/space issue in patch 3 of series

The following are changes since commit 8f2771f2b85aea4d0f9a0137ad3b63d1173c0962:
  ipv6: Remove route peer binding assertions.

and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6 master

Alexander Duyck (1):
  ixgbe: limit VF access to network traffic

Amir Hanania (1):
  ixgbe: DDP last buffer size work around

Don Skidmore (3):
  ixgbe: fix for 82599 erratum on Header Splitting.
  ixgbe: cleanup variable initialization
  ixgbe: update version string

Emil Tantilov (1):
  ixgbe: fix variable set but not used warnings by gcc 4.6

Florian Fainelli (1):
  e1000: add support for Marvell Alaska M88E1118R PHY

 drivers/net/e1000/e1000_hw.c     |    4 +++-
 drivers/net/e1000/e1000_hw.h     |    1 +
 drivers/net/ixgbe/ixgbe_common.c |    3 +++
 drivers/net/ixgbe/ixgbe_fcoe.c   |   21 ++++++++++++++++++++-
 drivers/net/ixgbe/ixgbe_main.c   |   16 ++++++++++------
 drivers/net/ixgbe/ixgbe_sriov.c  |    2 --
 drivers/net/ixgbe/ixgbe_x540.c   |    6 +++---
 7 files changed, 40 insertions(+), 13 deletions(-)

-- 
1.7.3.5

From: Don Skidmore <redacted>

We have found a hardware erratum on 82599 hardware that can lead to
unpredictable behavior when Header Splitting mode is enabled.  So
we are no longer enabling this feature on affected hardware.

Please see the 82599 Specification Update for more information.

CC: stable@kernel.org
Signed-off-by: Don Skidmore <redacted>
Tested-by: Stephen Ko <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_main.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 44a1cf0..1495b74 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c

@@ -3176,9 +3176,16 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 	u32 mhadd, hlreg0;
 
 	/* Decide whether to use packet split mode or not */
+	/* On by default */
+	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+
 	/* Do not use packet split if we're in SR-IOV Mode */
-	if (!adapter->num_vfs)
-		adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+	if (adapter->num_vfs)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+
+	/* Disable packet split due to 82599 erratum #45 */
+	if (hw->mac.type == ixgbe_mac_82599EB)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
 
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {

-- 
1.7.3.5

From: Florian Fainelli <redacted>

This patch adds support for Marvell Alask M88E188R PHY chips. Support for
other M88* PHYs is already there, so there is nothing more to add than its
PHY id.

CC: Dirk Brandewie <redacted>
Signed-off-by: Florian Fainelli <redacted>
Acked-by: Jesse Brandeburg <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/e1000/e1000_hw.c |    4 +++-
 drivers/net/e1000/e1000_hw.h |    1 +
 2 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index aed223b..7501d97 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c

@@ -124,6 +124,7 @@ static s32 e1000_set_phy_type(struct e1000_hw *hw)
 	case M88E1000_I_PHY_ID:
 	case M88E1011_I_PHY_ID:
 	case M88E1111_I_PHY_ID:
+	case M88E1118_E_PHY_ID:
 		hw->phy_type = e1000_phy_m88;
 		break;
 	case IGP01E1000_I_PHY_ID:

@@ -3222,7 +3223,8 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
 		break;
 	case e1000_ce4100:
 		if ((hw->phy_id == RTL8211B_PHY_ID) ||
-		    (hw->phy_id == RTL8201N_PHY_ID))
+		    (hw->phy_id == RTL8201N_PHY_ID) ||
+		    (hw->phy_id == M88E1118_E_PHY_ID))
 			match = true;
 		break;
 	case e1000_82541:

diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 196eeda..c70b23d 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h

@@ -2917,6 +2917,7 @@ struct e1000_host_command_info {
 #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
 #define M88E1011_I_REV_4   0x04
 #define M88E1111_I_PHY_ID  0x01410CC0
+#define M88E1118_E_PHY_ID  0x01410E40
 #define L1LXT971A_PHY_ID   0x001378E0
 
 #define RTL8211B_PHY_ID    0x001CC910

-- 
1.7.3.5

From: Emil Tantilov <redacted>

Caught with gcc 4.6 -Wunused-but-set-variable

Remove unused napi_vectors variable.

Fix the use of reset_bit in ixgbe_reset_hw_X540()

Signed-off-by: Emil Tantilov <redacted>
Tested-by: Stephen Ko <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_main.c |    3 ---
 drivers/net/ixgbe/ixgbe_x540.c |    6 +++---
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 602078b..44a1cf0 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c

@@ -4863,16 +4863,13 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
 {
 	int q_idx, num_q_vectors;
 	struct ixgbe_q_vector *q_vector;
-	int napi_vectors;
 	int (*poll)(struct napi_struct *, int);
 
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
 		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-		napi_vectors = adapter->num_rx_queues;
 		poll = &ixgbe_clean_rxtx_many;
 	} else {
 		num_q_vectors = 1;
-		napi_vectors = 1;
 		poll = &ixgbe_poll;
 	}
 

diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 3a89239..f2518b0 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c

@@ -133,17 +133,17 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
 	}
 
 	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
-	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
 	IXGBE_WRITE_FLUSH(hw);
 
 	/* Poll for reset bit to self-clear indicating reset is complete */
 	for (i = 0; i < 10; i++) {
 		udelay(1);
 		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
-		if (!(ctrl & IXGBE_CTRL_RST))
+		if (!(ctrl & reset_bit))
 			break;
 	}
-	if (ctrl & IXGBE_CTRL_RST) {
+	if (ctrl & reset_bit) {
 		status = IXGBE_ERR_RESET_FAILED;
 		hw_dbg(hw, "Reset polling failed to complete.\n");
 	}

-- 
1.7.3.5

From: Alexander Duyck <redacted>

This change fixes VM pool allocation issues based on MAC address filtering,
as well as limits the scope of VF access to promiscuous mode.

Signed-off-by: Alexander Duyck <redacted>
Acked-by: Greg Rose <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_common.c |    3 +++
 drivers/net/ixgbe/ixgbe_sriov.c  |    2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index d5ede2d..ebbda7d 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c

@@ -1370,6 +1370,9 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 		hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
 
 		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+		/*  clear VMDq pool/queue selection for RAR 0 */
+		hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
 	}
 	hw->addr_ctrl.overflow_promisc = 0;
 

diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 47b1573..187b3a1 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c

@@ -110,12 +110,10 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
 	return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
 }
 
-
 static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
 {
 	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 	vmolr |= (IXGBE_VMOLR_ROMPE |
-		  IXGBE_VMOLR_ROPE |
 		  IXGBE_VMOLR_BAM);
 	if (aupe)
 		vmolr |= IXGBE_VMOLR_AUPE;

-- 
1.7.3.5

From: Don Skidmore <redacted>

The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables
and this was producing compiler warnings.  This patch cleans that up.

Signed-off-by: Don Skidmore <redacted>
Tested-by: Stephen Ko <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_fcoe.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index ffac3f6..24d74ca 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c

@@ -165,7 +165,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	unsigned int thisoff = 0;
 	unsigned int thislen = 0;
 	u32 fcbuff, fcdmarw, fcfltrw;
-	dma_addr_t addr;
+	dma_addr_t addr = 0;
 
 	if (!netdev || !sgl)
 		return 0;

-- 
1.7.3.5

From: Amir Hanania <redacted>

We found a hardware erratum on 82599 hardware that can lead to buffer
overwriting if the last buffer in FCoE DDP is exactly PAGE_SIZE.
If this is the case, we will make sure that there is no HW access to
this buffer.

Please see the 82599 Specification Update for more information.

Signed-off-by: Amir Hanania <redacted>
Tested-by: Ross Brattain <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_fcoe.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 6342d48..ffac3f6 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c

@@ -254,6 +254,25 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	/* only the last buffer may have non-full bufflen */
 	lastsize = thisoff + thislen;
 
+	/*
+	 * lastsize can not be PAGE_SIZE.
+	 * If it is then adding another buffer with lastsize = 1.
+	 * Since lastsize is 1 there will be no HW access to this buffer.
+	 */
+	if (lastsize == PAGE_SIZE) {
+		if (j == (IXGBE_BUFFCNT_MAX - 1)) {
+			e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+				"not enough descriptors only since lastsize "
+				"is PAGE_SIZE\n",
+				xid, i, j, dmacount, (u64)addr);
+			goto out_noddp_free;
+		}
+
+		ddp->udl[j+1] = ddp->udl[j];
+		j++;
+		lastsize = 1;
+	}
+
 	fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
 	fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
 	fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);

-- 
1.7.3.5

From: Don Skidmore <redacted>

This will synchronize the version string with that of the latest source
forge driver which shares its functionality.

Signed-off-by: Don Skidmore <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ixgbe/ixgbe_main.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 1495b74..83e13a3 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c

@@ -52,7 +52,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 			      "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "3.0.12-k2"
+#define DRV_VERSION "3.2.9-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 

-- 
1.7.3.5

From: Jeff Kirsher <redacted>
Date: Fri, 28 Jan 2011 04:29:01 -0800

From: Amir Hanania <redacted>

We found a hardware erratum on 82599 hardware that can lead to buffer
overwriting if the last buffer in FCoE DDP is exactly PAGE_SIZE.
If this is the case, we will make sure that there is no HW access to
this buffer.

Please see the 82599 Specification Update for more information.

Signed-off-by: Amir Hanania <redacted>
Tested-by: Ross Brattain <redacted>
Signed-off-by: Jeff Kirsher <redacted>

Jeff, I still think this change is bogus.

PAGE_SIZE is variable, so the chip can't possibly only BUG on that
specific value.

Maybe the condition is "any power-of-2 larger than or equal to 4096"?
Or something like that?

I pointed this out last night, and I was really hoping I'd get actual
feedback on this issue before you're respin your tree.

I'm not pulling in these changes until I get a human being telling me
what the situation is here with this bug.

David,

Sorry I missed your mail from last night.

You are right, it should be bufflen, which is 4096 and not PAGE_SIZE.

I will fix that and resubmit.
-Amir


-----Original Message-----
From: David Miller [mailto:davem@davemloft.net] 
Sent: Friday, January 28, 2011 11:51 AM
To: Kirsher, Jeffrey T
Cc: Hanania, Amir; netdev@vger.kernel.org; gospo@redhat.com; bphilips@novell.com
Subject: Re: [net-2.6 v2 5/7] ixgbe: DDP last buffer size work around

From: Jeff Kirsher <redacted>
Date: Fri, 28 Jan 2011 04:29:01 -0800

From: Amir Hanania <redacted>

We found a hardware erratum on 82599 hardware that can lead to buffer
overwriting if the last buffer in FCoE DDP is exactly PAGE_SIZE.
If this is the case, we will make sure that there is no HW access to
this buffer.

Please see the 82599 Specification Update for more information.

Signed-off-by: Amir Hanania <redacted>
Tested-by: Ross Brattain <redacted>
Signed-off-by: Jeff Kirsher <redacted>

Jeff, I still think this change is bogus.

PAGE_SIZE is variable, so the chip can't possibly only BUG on that
specific value.

Maybe the condition is "any power-of-2 larger than or equal to 4096"?
Or something like that?

I pointed this out last night, and I was really hoping I'd get actual
feedback on this issue before you're respin your tree.

I'm not pulling in these changes until I get a human being telling me
what the situation is here with this bug.

From: "Hanania, Amir" <redacted>
Date: Fri, 28 Jan 2011 13:36:15 -0800

Sorry I missed your mail from last night.

You are right, it should be bufflen, which is 4096 and not PAGE_SIZE.

I will fix that and resubmit.

Thanks for looking into this.