[PATCH net-2.6 3/8] bnx2x: LED fix for BCM8727 over BCM57712
DORMANTno replies
From: Yaniv Rosner <hidden>
Date: 2011-01-18 14:32:52
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 18 +++++++++++++++++- 1 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index bdf3c67..36a8844 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -3166,7 +3166,23 @@ u8 bnx2x_set_led(struct link_params *params, if (!vars->link_up) break; case LED_MODE_ON: - if (SINGLE_MEDIA_DIRECT(params)) { + if (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 && + CHIP_IS_E2(bp) && params->num_phys == 2) { + /** + * This is a work-around for E2+8727 Configurations + */ + if (mode == LED_MODE_ON || + speed == SPEED_10000){ + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp | EMAC_LED_OVERRIDE)); + return rc; + } + } else if (SINGLE_MEDIA_DIRECT(params)) { /** * This is a work-around for HW issue found when link * is up in CL73
--
1.7.1