From: Joel Sing <hidden> Date: 2011-01-04 06:24:48
The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.
This bug can be demonstrated as follows:
# ifconfig dummy0 192.168.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1
# ip route change table local local 192.168.0.1 dev dummy0 \
proto kernel scope host src 127.0.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1
We now establish a local connection and verify the source IP
address selection:
# nc -l 192.168.0.1 3128 &
# nc 192.168.0.1 3128 &
# netstat -ant | grep 192.168.0.1:3128.*EST
tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED
tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED
Signed-off-by: Joel Sing <redacted>
---
net/ipv4/route.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
From: Eric Dumazet <hidden> Date: 2011-01-04 07:24:45
Le mardi 04 janvier 2011 à 17:24 +1100, Joel Sing a écrit :
quoted hunk
The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.
This bug can be demonstrated as follows:
# ifconfig dummy0 192.168.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1
# ip route change table local local 192.168.0.1 dev dummy0 \
proto kernel scope host src 127.0.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1
We now establish a local connection and verify the source IP
address selection:
# nc -l 192.168.0.1 3128 &
# nc 192.168.0.1 3128 &
# netstat -ant | grep 192.168.0.1:3128.*EST
tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED
tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED
Signed-off-by: Joel Sing <redacted>
---
net/ipv4/route.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
From: Eric Dumazet <hidden> Date: 2011-01-04 08:38:40
Le mardi 04 janvier 2011 à 16:07 +0800, Changli Gao a écrit :
On Tue, Jan 4, 2011 at 3:33 PM, Eric Dumazet [off-list ref] wrote:
quoted
Le mardi 04 janvier 2011 à 08:24 +0100, Eric Dumazet a écrit :
quoted
Please use FIB_RES_PREFSRC(res)
Hmm no, this is not applicable, but this could be shorter :
fl.fl4_src = res.fi->fib_prefsrc ? : fl.fl4_dst;
I think Joe may object the use of "? :"
Ternary operator is standard C idiom, used in networking stuff, for
example in FIB_RES_PREFSRC() ;)
This could be properly done using another macro in include/net/ip_fib.h
to centralize this ternary op in one point :
#define __FIB_RES_PREFSRC(res, default) ((res).fi->fib_prefsrc ? : default)
#define FIB_RES_PREFSRC(res) __FIB_RES_PREFSRC(res, default, __fib_res_prefsrc(&res))
From: Eric Dumazet <hidden> Date: 2011-01-04 08:40:24
Le mardi 04 janvier 2011 à 09:38 +0100, Eric Dumazet a écrit :
This could be properly done using another macro in include/net/ip_fib.h
to centralize this ternary op in one point :
#define __FIB_RES_PREFSRC(res, default) ((res).fi->fib_prefsrc ? : default)
#define FIB_RES_PREFSRC(res) __FIB_RES_PREFSRC(res, default, __fib_res_prefsrc(&res)
I meant
#define FIB_RES_PREFSRC(res) __FIB_RES_PREFSRC(res, __fib_res_prefsrc(&res))
From: Ben Hutchings <hidden> Date: 2011-01-04 14:16:34
On Tue, 2011-01-04 at 09:38 +0100, Eric Dumazet wrote:
Le mardi 04 janvier 2011 à 16:07 +0800, Changli Gao a écrit :
quoted
On Tue, Jan 4, 2011 at 3:33 PM, Eric Dumazet [off-list ref] wrote:
quoted
Le mardi 04 janvier 2011 à 08:24 +0100, Eric Dumazet a écrit :
quoted
Please use FIB_RES_PREFSRC(res)
Hmm no, this is not applicable, but this could be shorter :
fl.fl4_src = res.fi->fib_prefsrc ? : fl.fl4_dst;
I think Joe may object the use of "? :"
Ternary operator is standard C idiom, used in networking stuff, for
example in FIB_RES_PREFSRC() ;)
[...]
However, the option to omit the second operand is a GNU extension.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
From: Joe Perches <joe@perches.com> Date: 2011-01-04 15:32:11
On Tue, 2011-01-04 at 14:16 +0000, Ben Hutchings wrote:
On Tue, 2011-01-04 at 09:38 +0100, Eric Dumazet wrote:
quoted
Le mardi 04 janvier 2011 à 16:07 +0800, Changli Gao a écrit :
quoted
On Tue, Jan 4, 2011 at 3:33 PM, Eric Dumazet [off-list ref] wrote:
quoted
Le mardi 04 janvier 2011 à 08:24 +0100, Eric Dumazet a écrit :
quoted
Please use FIB_RES_PREFSRC(res)
Hmm no, this is not applicable, but this could be shorter :
fl.fl4_src = res.fi->fib_prefsrc ? : fl.fl4_dst;
I think Joe may object the use of "? :"
Ternary operator is standard C idiom, used in networking stuff, for
example in FIB_RES_PREFSRC() ;)
However, the option to omit the second operand is a GNU extension.
I don't object to using GNU extensions.
The ?: extension is used in most every major subsystem.
$ grep -rP --include=*.[ch] "\?\s*:" * | wc -l
515
(with some false positives)
From: David Miller <davem@davemloft.net> Date: 2011-01-04 19:35:19
From: Joel Sing <redacted>
Date: Tue, 4 Jan 2011 17:24:20 +1100
The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.
This bug can be demonstrated as follows:
# ifconfig dummy0 192.168.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1
# ip route change table local local 192.168.0.1 dev dummy0 \
proto kernel scope host src 127.0.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1
We now establish a local connection and verify the source IP
address selection:
# nc -l 192.168.0.1 3128 &
# nc 192.168.0.1 3128 &
# netstat -ant | grep 192.168.0.1:3128.*EST
tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED
tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED
Signed-off-by: Joel Sing <redacted>
Applied to net-2.6, thanks Joel.
If you guys want to mess with ternary operators and new macros,
please do that in net-next-2.6 the next time I merge or similar.
Thanks.