[PATCH net-2.6 5/8] bnx2x: Fix resetting BCM8726 PHY during common init
From: Yaniv Rosner <hidden>
Date: 2010-11-01 12:14:41
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
On BCM8726 based designs, the ports are swapped, hence the reset needs to be asserted through port0 and not port1. Signed-off-by: Yaniv Rosner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x_link.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index fdd7e03..488e251 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c@@ -7152,7 +7152,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - bnx2x_ext_phy_hw_reset(bp, 1); + bnx2x_ext_phy_hw_reset(bp, 0); msleep(5); for (port = 0; port < PORT_MAX; port++) { u32 shmem_base, shmem2_base;
--
1.7.1