[PATCH] ks8851: suspend resume support

Subsystems: networking drivers, the rest

STALE5762d

2 messages, 2 authors, 2010-11-08 · open the first message on its own page

[PATCH] ks8851: suspend resume support

From: Arce, Abraham <hidden>
Date: 2010-10-29 04:57:29

Add suspend/resume support using default open/stop interface methods
to do hardware dependant operations.

On suspend, same low power state (soft power mode) will be kept, the
following blocks will be disabled:

 - Internal PLL Clock
 - Tx/Rx PHY
 - MAC
 - SPI Interface

Signed-off-by: Abraham Arce <redacted>
---
 drivers/net/ks8851.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 8a178bc..9d40e33 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -1570,6 +1570,37 @@ static int ks8851_read_selftest(struct ks8851_net *ks)
 
 /* driver bus management functions */
 
+#ifdef CONFIG_PM
+static int ks8851_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct ks8851_net *ks = dev_get_drvdata(&spi->dev);
+	struct net_device *dev = ks->netdev;
+
+	if (netif_running(dev)) {
+		netif_device_detach(dev);
+		ks8851_net_stop(dev);
+	}
+
+	return 0;
+}
+
+static int ks8851_resume(struct spi_device *spi)
+{
+	struct ks8851_net *ks = dev_get_drvdata(&spi->dev);
+	struct net_device *dev = ks->netdev;
+
+	if (netif_running(dev)) {
+		ks8851_net_open(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+#else
+#define ks8851_suspend NULL
+#define ks8851_resume NULL
+#endif
+
 static int __devinit ks8851_probe(struct spi_device *spi)
 {
 	struct net_device *ndev;
@@ -1710,6 +1741,8 @@ static struct spi_driver ks8851_driver = {
 	},
 	.probe = ks8851_probe,
 	.remove = __devexit_p(ks8851_remove),
+	.suspend = ks8851_suspend,
+	.resume = ks8851_resume,
 };
 
 static int __init ks8851_init(void)
-- 
1.5.4.3

Re: [PATCH] ks8851: suspend resume support

From: David Miller <davem@davemloft.net>
Date: 2010-11-08 21:42:54

From: "Arce, Abraham" <redacted>
Date: Thu, 28 Oct 2010 23:57:20 -0500
Add suspend/resume support using default open/stop interface methods
to do hardware dependant operations.

On suspend, same low power state (soft power mode) will be kept, the
following blocks will be disabled:

 - Internal PLL Clock
 - Tx/Rx PHY
 - MAC
 - SPI Interface

Signed-off-by: Abraham Arce <redacted>
Applied.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help