[PATCH net-next 2/8] bnx2x: store module parameters in driver main structure
From: Dmitry Kravkov <hidden>
Date: 2010-07-27 22:42:26
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Store module parameters during initialization of main driver structure. This will allow access to the parameters from different files. Signed-off-by: Dmitry Kravkov <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x/bnx2x.h | 2 ++ drivers/net/bnx2x/bnx2x_main.c | 7 ++++--- 2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 3b51c5f..237609f 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h@@ -1006,6 +1006,8 @@ struct bnx2x { int multi_mode; int num_queues; + int disable_tpa; + int int_mode; u32 rx_mode; #define BNX2X_RX_MODE_NONE 0
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 51b7883..1e0ac8b 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c@@ -7878,7 +7878,7 @@ static int bnx2x_set_num_queues(struct bnx2x *bp) { int rc = 0; - switch (int_mode) { + switch (bp->int_mode) { case INT_MODE_INTx: case INT_MODE_MSI: bp->num_queues = 1;
@@ -9951,7 +9951,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) multi_mode = ETH_RSS_MODE_DISABLED; } bp->multi_mode = multi_mode; - + bp->int_mode = int_mode; bp->dev->features |= NETIF_F_GRO;
@@ -9963,6 +9963,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) bp->flags |= TPA_ENABLE_FLAG; bp->dev->features |= NETIF_F_LRO; } + bp->disable_tpa = disable_tpa; if (CHIP_IS_E1(bp)) bp->dropless_fc = 0;
@@ -11006,7 +11007,7 @@ static int bnx2x_set_flags(struct net_device *dev, u32 data) /* TPA requires Rx CSUM offloading */ if ((data & ETH_FLAG_LRO) && bp->rx_csum) { - if (!disable_tpa) { + if (!bp->disable_tpa) { if (!(dev->features & NETIF_F_LRO)) { dev->features |= NETIF_F_LRO; bp->flags |= TPA_ENABLE_FLAG;
--
1.7.1