[PATCH 6/9] tg3: Reset phy during bringup when using phylib

The driver puts the phy into low-power mode when it releases the device.
If the device were to be reacquired, the phy needs a reset to bring it
back to full powered operation.  This patch allows phylib-enabled
devices to reset the phy.

Signed-off-by: Matt Carlson <redacted>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <redacted>
---
 drivers/net/tg3.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1c545a8..9c4d88a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c

@@ -7595,8 +7595,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (reset_phy &&
-	    !(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB))
+	if (reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);

-- 
1.6.4.4