transmit timed out with tulip on sparc64

From: Meelis Roos <hidden>
Date: 2010-02-02 16:23:16

(Found a postponed mesasage from some time ago and restested - still a 
problem with 2.6.33-rc6)

I have a Sun Fire V100 running bleeding-edge kernels.

I usually do not transfer large amounts of data - updating debian 
unstable is the most stressing one. However, today I tried to copy 
gigabytes of data over scp to this machine and it dropped out of the 
network. Reson unknown, attaching serial console after that gave the 
following transmit timeout message that may or may not be the primary 
reason.

2.6.32-rc3-00052-g0eca52a:

[130930.573930] ------------[ cut here ]------------
[130930.635834] WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x258/0x280()
[130930.731919] NETDEV WATCHDOG: eth0 (tulip): transmit queue 0 timed out
[130930.817722] Modules linked in: ipv6 fuse loop usbhid ohci_hcd sg sr_mod usbcore cdrom
[130930.921905] Call Trace:
[130930.955091]  [0000000000454230] warn_slowpath_common+0x50/0xa0
[130931.032922]  [00000000004542f4] warn_slowpath_fmt+0x34/0x60
[130931.107316]  [000000000064a658] dev_watchdog+0x258/0x280
[130931.178289]  [000000000045f6f4] run_timer_softirq+0x1b4/0x240
[130931.254975]  [000000000045a484] __do_softirq+0xa4/0x140
[130931.324798]  [000000000042a93c] do_softirq+0x7c/0xa0
[130931.391189]  [000000000045a0cc] irq_exit+0x8c/0xc0
[130931.455303]  [000000000042fcc4] timer_interrupt+0x64/0xa0
[130931.527412]  [00000000004209d4] tl0_irq14+0x14/0x20
[130931.592671]  [000000000043af60] touch_nmi_watchdog+0x0/0x60
[130931.667064]  [00000000006b59a8] rest_init+0x68/0x80
[130931.732321]  [00000000008247c4] start_kernel+0x2ac/0x2e8
[130931.803280]  [00000000006b5924] tlb_fixup_done+0x80/0x9c
[130931.874243]  [0000000000000000] (null)
[130931.924635] ---[ end trace 70d1b6d12c0cb235 ]---

I restared the computer and reran the test to see whether something 
appears on the console before - no, it doesn't, this is the first log 
snippet and is basically the same.

[  105.701102] eth0: no IPv6 routers present
[  473.311090] ------------[ cut here ]------------
[  473.371799] WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x258/0x280()
[  473.466747] NETDEV WATCHDOG: eth0 (tulip): transmit queue 0 timed out
[  473.551407] Modules linked in: ipv6 fuse loop usbhid ohci_hcd sg sr_mod cdrom usbcore
[  473.654446] Call Trace:
[  473.686491]  [0000000000454230] warn_slowpath_common+0x50/0xa0
[  473.763176]  [00000000004542f4] warn_slowpath_fmt+0x34/0x60
[  473.836430]  [000000000064a658] dev_watchdog+0x258/0x280
[  473.906265]  [000000000045f6f4] run_timer_softirq+0x1b4/0x240
[  473.981806]  [000000000045a484] __do_softirq+0xa4/0x140
[  474.050479]  [000000000042a93c] do_softirq+0x7c/0xa0
[  474.115728]  [000000000045a0cc] irq_exit+0x8c/0xc0
[  474.178699]  [000000000042fcc4] timer_interrupt+0x64/0xa0
[  474.249666]  [00000000004209d4] tl0_irq14+0x14/0x20
[  474.313784]  [0000000000590c80] mcount+0xc0/0xe0
[  474.374457]  [000000000042c94c] cpu_idle+0x4c/0x100
[  474.438568]  [00000000006b59a8] rest_init+0x68/0x80
[  474.502683]  [00000000008247c4] start_kernel+0x2ac/0x2e8
[  474.572503]  [00000000006b5924] tlb_fixup_done+0x80/0x9c
[  474.642320]  [0000000000000000] (null)

Now verified that the same happens with selfcompiled 2.6.31.

Freshly tested that it also happens with 2.6.33-rc6:

[247694.931852] ------------[ cut here ]------------
[247694.993771] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x240/0x260()
[247695.089865] NETDEV WATCHDOG: eth0 (tulip): transmit queue 0 timed out
[247695.175667] Modules linked in: ipv6 fuse loop ohci_hcd sg sr_mod usbcore cdrom
[247695.271857] Call Trace:
[247695.305135]  [0000000000454aac] warn_slowpath_common+0x4c/0x80
[247695.382967]  [0000000000454b4c] warn_slowpath_fmt+0x2c/0x40
[247695.457360]  [0000000000645160] dev_watchdog+0x240/0x260
[247695.528334]  [000000000046008c] run_timer_softirq+0x18c/0x240
[247695.605020]  [000000000045abb8] __do_softirq+0x98/0x140
[247695.674842]  [000000000042a758] do_softirq+0x78/0xa0
[247695.741234]  [000000000045a830] irq_exit+0x90/0xa0
[247695.805347]  [000000000042f860] timer_interrupt+0x60/0xa0
[247695.877460]  [00000000004209d4] tl0_irq14+0x14/0x20
[247695.942710]  [000000000058b944] mcount+0x4/0xe0
[247696.003387]  [000000000042c764] cpu_idle+0x44/0xe0
[247696.067502]  [00000000006b025c] rest_init+0x5c/0x80
[247696.132758]  [0000000000810794] start_kernel+0x2d4/0x2e4
[247696.203720]  [00000000006b01e4] tlb_fixup_done+0x80/0x9c
[247696.274682]  [0000000000000000] (null)
[247696.325070] ---[ end trace 27a08f024f3aa132 ]---

-- 
Meelis Roos (mroos@linux.ee)
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help