[PATCH net-next 08/10] tg3: Turn off the debug UART for 57765
From: Matt Carlson <hidden>
Date: 2010-01-21 02:58:31
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
If the debug UART is left enabled, the LEDs will not work properly. This patch disables the debug UART. Signed-off-by: Matt Carlson <redacted> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <redacted> --- drivers/net/tg3.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dffa51a..075d21a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c@@ -13328,7 +13328,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
--
1.6.4.4