[net-next 28/36] bnx2x: Re-arrange the link structures for better alignment
From: Eilon Greenstein <hidden>
Date: 2009-08-12 18:25:00
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Change ieee_fc to u16 instead of u32 and re-arrange the link parameters structures Signed-off-by: Yitchak Gertner <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x_link.c | 6 +++--- drivers/net/bnx2x_link.h | 31 +++++++++++++++++++------------ 2 files changed, 22 insertions(+), 15 deletions(-)
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index c163c42..74f4d10 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c@@ -1347,7 +1347,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params) MDIO_OVER_1G_UP3, 0x400); } -static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) +static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc) { *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; /* resolve pause mode and advertisement
@@ -1381,7 +1381,7 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) } static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params, - u32 ieee_fc) + u16 ieee_fc) { struct bnx2x *bp = params->bp; /* for AN, we are always publishing full duplex */
@@ -1389,7 +1389,7 @@ static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params, CL45_WR_OVER_CL22(bp, params->port, params->phy_addr, MDIO_REG_BANK_COMBO_IEEE0, - MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc); + MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); } static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 6d26d6c..e0d7eef 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h@@ -81,6 +81,11 @@ struct link_params { #define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT u16 hw_led_mode; /* part of the hw_config read from the shmem */ + + /* phy_addr populated by the phy_init function */ + u8 phy_addr; + /*u8 reserved1;*/ + u32 lane_config; u32 ext_phy_config; #define XGXS_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \
@@ -90,39 +95,41 @@ struct link_params { /* Phy register parameter */ u32 chip_id; - /* phy_addr populated by the CLC */ - u8 phy_addr; u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */ - u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */ + u32 feature_config_flags; #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) #define FEATURE_CONFIG_BCM8727_NOC (1<<3) + /* Device pointer passed to all callback functions */ struct bnx2x *bp; }; /* Output parameters */ struct link_vars { + u8 phy_flags; + + u8 mac_type; +#define MAC_TYPE_NONE 0 +#define MAC_TYPE_EMAC 1 +#define MAC_TYPE_BMAC 2 + u8 phy_link_up; /* internal phy link indication */ u8 link_up; + + u16 line_speed; u16 duplex; + u16 flow_ctrl; - u32 ieee_fc; - u8 mac_type; + u16 ieee_fc; -#define MAC_TYPE_NONE 0 -#define MAC_TYPE_EMAC 1 -#define MAC_TYPE_BMAC 2 - u16 line_speed; u32 autoneg; #define AUTO_NEG_DISABLED 0x0 #define AUTO_NEG_ENABLED 0x1 #define AUTO_NEG_COMPLETE 0x2 -#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3 - - u8 phy_flags; +#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3 /* The same definitions as the shmem parameter */ u32 link_status;
--
1.5.4.3