[net-next 05/36] bnx2x: Advertize flow control normally in MF mode
From: Eilon Greenstein <hidden>
Date: 2009-08-12 18:23:09
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/bnx2x_main.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 442ba61..47b687b 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c@@ -2148,9 +2148,7 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) /* Initialize link parameters structure variables */ /* It is recommended to turn off RX FC for jumbo frames for better performance */ - if (IS_E1HMF(bp)) - bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; - else if (bp->dev->mtu > 5000) + if (bp->dev->mtu > 5000) bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; else bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
--
1.5.4.3