RE: Re: [HELP] for using class group classifier network controller

Hi, Cheiyol 

quoted

# classid 1:10 

echo 0x1000A > /dev/cpuctl/foo/net_cls.classid 

#classid 1:20 

echo 0x10014 > /dev/cpuctl/bob/net_cls.classid 

(snip) 

quoted

# add class 1:10 for foo group 

$TC class add dev eth0 parent 1:0 classid 1:10 htb rate 50mbit 

# add class 1:20 for bob group 

$TC class add dev eth0 parent 1:0 classid 1:20 htb rate 30mbit 

# default class 

$TC class add dev eth0 parent 1:0 classid 1:30 htb rate 10mbit 

In class ID to use TC, both a major number and a minor number are hexadecimal. 
So 1:10 equals 0x00010010. 

I think, you should set 0x10010 to net_cls.classid if you classify to 1:10. 

I have done this by your advice. But it didn't work.
I followed the instructions by http://thread.gmane.org/gmane.linux.network/108551/focus=108661
So I supposed classid 1:10 is the decimal number, so I set the 0xA0001 as 1:10.
 
I'm curious if this patch net_cls operates well in other's hands.
How about you?
Does your system using net_cls operate well?
If then, would you let me know the environment and configuration of your system.
I would reference your environment for solving my problem.
 
Thanks again for helping
 
- Cheiyol