# Re: Regression on VIA C3 motherboard, commit: 66f2173e2

- From: Robert Hancock \<hidden\>
- Date: 2009-02-06 00:33:43 
- List: netdev
- Page: https://ratatoskr.run/netdev/2009/02/1206165
- Thread: https://ratatoskr.run/netdev/2009/02/1205699/t.md

```text
Ben Greear wrote:
> I have a via motherboard with C3 processor and some real-tek NICs.  I noticed
> when using the top-of-tree that performance on it sucked (30Mbps v/s 54Mbps
> network throughput in one pertinent test).
>
> After several hours of bisecting, I see this as the culprit:
>
> 7b37b5fd9ba32c0c5afc3537eed7e7466f2173e2 is first bad commit
> commit 7b37b5fd9ba32c0c5afc3537eed7e7466f2173e2
> Author: Len Brown [ref]
> Date:   Tue Dec 23 01:47:42 2008 -0500
>
>    ACPI: disable MPS when NO APIC-table found
>      When ACPI is asked to find an MADT (APIC table)
>    and fails, then ACPI expects to run in PIC mode.
>      However, if an MP Table is was found, IRQs will be
>    registered as if an IOAPIC is being used, even
>    though ACPI is configuring interrupt links links for PIC mode.
>      In this scenario, disable MPS so that IRQs
>    are registered in PIC mode, consistent with ACPI.
>      http://bugzilla.kernel.org/show_bug.cgi?id=12257
>      Signed-off-by: Len Brown [ref]
>
> :040000 040000 86ce74daee3a9fe6ff21ef7f8fb364af23ec0c1e 364933dfec0df34e63b1aeff6aff4092d421886b M      arch
>
>
> In addition, I see this warning in my logs, which is likely the symptom:
>
> ACPI Exception (tbxface-0627): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables ]
> ACPI: Unable to load the System Description Tables

You're getting this on boot:

ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926]

That essentially means ACPI isn't working at all, I think. Did previous kernels produce this error? Do you have ACPI disabled in the BIOS or something?
```