[PATCH 2.6.25][BNX2X] BNX2X: prevent ethtool setting of port type
From: Eliezer Tamir <hidden>
Date: 2008-03-10 12:04:23
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
BNX2X: prevent ethtool setting of port type On 10GBaseT boards setting the type to TP will cause the driver to try to configure 1GBaseT. Since there are currently no boards that support setting the of the port type, disable this for now. Signed-off-by: Eliezer Tamir <redacted> --- drivers/net/bnx2x.c | 36 ++---------------------------------- 1 files changed, 2 insertions(+), 34 deletions(-)
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 8af142c..de32b3f 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c@@ -63,8 +63,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.40.22" -#define DRV_MODULE_RELDATE "2007/11/27" +#define DRV_MODULE_VERSION "1.42.3" +#define DRV_MODULE_RELDATE "2008/3/9" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */
@@ -8008,38 +8008,6 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver, cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt); - switch (cmd->port) { - case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) { - DP(NETIF_MSG_LINK, "TP not supported\n"); - return -EINVAL; - } - - if (bp->phy_flags & PHY_XGXS_FLAG) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_1G); - bnx2x_phy_deassert(bp); - } - break; - - case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) { - DP(NETIF_MSG_LINK, "FIBRE not supported\n"); - return -EINVAL; - } - - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_10G); - bnx2x_phy_deassert(bp); - } - break; - - default: - DP(NETIF_MSG_LINK, "Unknown port type\n"); - return -EINVAL; - } - if (cmd->autoneg == AUTONEG_ENABLE) { if (!(bp->supported & SUPPORTED_Autoneg)) { DP(NETIF_MSG_LINK, "Aotoneg not supported\n");