[PATCH 1/2] igb: PCIe devices do not need to unset MANC_ARP_ENA

Subsystems: networking drivers, the rest

STALE6741d

3 messages, 2 authors, 2008-02-15 · open the first message on its own page

[PATCH 1/2] igb: PCIe devices do not need to unset MANC_ARP_ENA

From: Auke Kok <hidden>
Date: 2008-02-14 18:17:12

From: David Graham <redacted>

Users reported that ARP's were lost with igb. The problem
is fixed by not enabling this manageability configuration
bit.

None of the release_manageability code is actually needed as the
normal device reset during a shutdown returns everthing to
the right condition automatically.

Signed-off-by: David Graham <redacted>
Signed-off-by: Auke Kok <redacted>
---

 drivers/net/igb/igb_main.c |   28 ----------------------------
 1 files changed, 0 insertions(+), 28 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d4eb8e2..bff280e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c

@@ -606,9 +606,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
 		u32 manc2h = rd32(E1000_MANC2H);
 		u32 manc = rd32(E1000_MANC);
 
-		/* disable hardware interception of ARP */
-		manc &= ~(E1000_MANC_ARP_EN);
-
 		/* enable receiving management packets to the host */
 		/* this will probably generate destination unreachable messages
 		 * from the host OS, but the packets will be handled on SMBUS */

@@ -623,25 +620,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
 	}
 }
 
-static void igb_release_manageability(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-
-	if (adapter->en_mng_pt) {
-		u32 manc = rd32(E1000_MANC);
-
-		/* re-enable hardware interception of ARP */
-		manc |= E1000_MANC_ARP_EN;
-		manc &= ~E1000_MANC_EN_MNG2HOST;
-
-		/* don't explicitly have to mess with MANC2H since
-		 * MANC has an enable disable that gates MANC2H */
-
-		/* XXX stop the hardware watchdog ? */
-		wr32(E1000_MANC, manc);
-	}
-}
-
 /**
  * igb_configure - configure the hardware for RX and TX
  * @adapter: private board structure

@@ -844,7 +822,6 @@ void igb_reset(struct igb_adapter *adapter)
 
 	igb_reset_adaptive(&adapter->hw);
 	adapter->hw.phy.ops.get_phy_info(&adapter->hw);
-	igb_release_manageability(adapter);
 }
 
 /**

@@ -1178,9 +1155,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	flush_scheduled_work();
 
-
-	igb_release_manageability(adapter);
-
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
 	igb_release_hw_control(adapter);

@@ -3955,8 +3929,6 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
-	igb_release_manageability(adapter);
-
 	/* make sure adapter isn't asleep if manageability is enabled */
 	if (adapter->en_mng_pt) {
 		pci_enable_wake(pdev, PCI_D3hot, 1);


-------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[PATCH 2/2] e1000e: PCIe devices do not need to unset MANC_ARP_ENA

From: Auke Kok <hidden>
Date: 2008-02-14 18:17:27

From: David Graham <redacted>

Users reported that ARP's were lost with e1000e. The problem
is fixed by not enabling this manageability configuration
bit.

None of the release_manageability code is actually needed as the
normal device reset during a shutdown returns everthing to
the right condition automatically.

Signed-off-by: David Graham <redacted>
Signed-off-by: Auke Kok <redacted>
---

 drivers/net/e1000e/netdev.c |   26 --------------------------
 1 files changed, 0 insertions(+), 26 deletions(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ea4ecc3..3031d6d 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c

@@ -1055,23 +1055,6 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
 	}
 }
 
-static void e1000_release_manageability(struct e1000_adapter *adapter)
-{
-	if (adapter->flags & FLAG_MNG_PT_ENABLED) {
-		struct e1000_hw *hw = &adapter->hw;
-
-		u32 manc = er32(MANC);
-
-		/* re-enable hardware interception of ARP */
-		manc |= E1000_MANC_ARP_EN;
-		manc &= ~E1000_MANC_EN_MNG2HOST;
-
-		/* don't explicitly have to mess with MANC2H since
-		 * MANC has an enable disable that gates MANC2H */
-		ew32(MANC, manc);
-	}
-}
-
 /**
  * @e1000_alloc_ring - allocate memory for a ring structure
  **/

@@ -1561,9 +1544,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
 
 	manc = er32(MANC);
 
-	/* disable hardware interception of ARP */
-	manc &= ~(E1000_MANC_ARP_EN);
-
 	/* enable receiving management packets to the host. this will probably
 	 * generate destination unreachable messages from the host OS, but
 	 * the packets will be handled on SMBUS */

@@ -2140,8 +2120,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		phy_data &= ~IGP02E1000_PM_SPD;
 		e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
 	}
-
-	e1000_release_manageability(adapter);
 }
 
 int e1000e_up(struct e1000_adapter *adapter)

@@ -3487,8 +3465,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
-	e1000_release_manageability(adapter);
-
 	/* make sure adapter isn't asleep if manageability is enabled */
 	if (adapter->flags & FLAG_MNG_PT_ENABLED) {
 		pci_enable_wake(pdev, PCI_D3hot, 1);

@@ -4054,8 +4030,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 
 	flush_scheduled_work();
 
-	e1000_release_manageability(adapter);
-
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
 	e1000_release_hw_control(adapter);

Re: [PATCH 2/2] e1000e: PCIe devices do not need to unset MANC_ARP_ENA

From: Jeff Garzik <hidden>
Date: 2008-02-15 15:53:58

Auke Kok wrote:

From: David Graham <redacted>

Users reported that ARP's were lost with e1000e. The problem
is fixed by not enabling this manageability configuration
bit.

None of the release_manageability code is actually needed as the
normal device reset during a shutdown returns everthing to
the right condition automatically.

Signed-off-by: David Graham <redacted>
Signed-off-by: Auke Kok <redacted>
---

 drivers/net/e1000e/netdev.c |   26 --------------------------
 1 files changed, 0 insertions(+), 26 deletions(-)

applied 1-2



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help