[PATCH] TCP: H-TCP maxRTT estimation at startup

STALE6955d

2 messages, 2 authors, 2007-08-08 · open the first message on its own page

[PATCH] TCP: H-TCP maxRTT estimation at startup

From: Stephen Hemminger <hidden>
Date: 2007-08-03 09:57:34

Small patch to H-TCP from Douglas Leith. 

Fix estimation of maxRTT.  The original code ignores rtt measurements
during slow start (via the check tp->snd_ssthresh < 0xFFFF) yet this
is probably a good time to try to estimate max rtt as delayed acking
is disabled and slow start will only exit on a loss which presumably
corresponds to a maxrtt measurement.  Second, the original code (via
the check htcp_ccount(ca) > 3) ignores rtt data during what it
estimates to be the first 3 round-trip times.  This seems like an
unnecessary check now that the RCV timestamp are no longer used
for rtt estimation.

Signed-off-by: Stephen Hemminger <redacted>
--- a/net/ipv4/tcp_htcp.c	2007-08-03 10:51:51.000000000 +0100
+++ b/net/ipv4/tcp_htcp.c	2007-08-03 10:51:53.000000000 +0100
@@ -79,7 +79,6 @@ static u32 htcp_cwnd_undo(struct sock *s
 static inline void measure_rtt(struct sock *sk, u32 srtt)
 {
 	const struct inet_connection_sock *icsk = inet_csk(sk);
-	const struct tcp_sock *tp = tcp_sk(sk);
 	struct htcp *ca = inet_csk_ca(sk);
 
 	/* keep track of minimum RTT seen so far, minRTT is zero at first */
@@ -87,8 +86,7 @@ static inline void measure_rtt(struct so
 		ca->minRTT = srtt;
 
 	/* max RTT */
-	if (icsk->icsk_ca_state == TCP_CA_Open
-	    && tp->snd_ssthresh < 0xFFFF && htcp_ccount(ca) > 3) {
+	if (icsk->icsk_ca_state == TCP_CA_Open) {
 		if (ca->maxRTT < ca->minRTT)
 			ca->maxRTT = ca->minRTT;
 		if (ca->maxRTT < srtt

Re: [PATCH] TCP: H-TCP maxRTT estimation at startup

From: David Miller <davem@davemloft.net>
Date: 2007-08-08 01:29:17

From: Stephen Hemminger <redacted>
Date: Fri, 3 Aug 2007 10:57:56 +0100
Small patch to H-TCP from Douglas Leith. 

Fix estimation of maxRTT.  The original code ignores rtt measurements
during slow start (via the check tp->snd_ssthresh < 0xFFFF) yet this
is probably a good time to try to estimate max rtt as delayed acking
is disabled and slow start will only exit on a loss which presumably
corresponds to a maxrtt measurement.  Second, the original code (via
the check htcp_ccount(ca) > 3) ignores rtt data during what it
estimates to be the first 3 round-trip times.  This seems like an
unnecessary check now that the RCV timestamp are no longer used
for rtt estimation.

Signed-off-by: Stephen Hemminger <redacted>
Applied, thanks Stephen.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help