[2.6 patch] EP93XX_ETH must select MII

STALE6992d

3 messages, 3 authors, 2007-07-16 · open the first message on its own page

[2.6 patch] EP93XX_ETH must select MII

From: Adrian Bunk <hidden>
Date: 2007-07-13 00:11:45

From: John Donoghue <redacted>

CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error.

Signed-off-by: Adrian Bunk <redacted>
--- linux-2.6.20.2.orig/drivers/net/arm/Kconfig	2007-03-09 22:32:46.000000000 -0500
+++ linux-2.6.20.2/drivers/net/arm/Kconfig	2007-03-09 22:50:43.000000000 -0500
@@ -43,6 +43,7 @@
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
+	select MII
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.

Re: [2.6 patch] EP93XX_ETH must select MII

From: Lennert Buytenhek <hidden>
Date: 2007-07-13 07:37:34

On Fri, Jul 13, 2007 at 02:12:08AM +0200, Adrian Bunk wrote:
From: John Donoghue <redacted>

CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error.

Signed-off-by: Adrian Bunk <redacted>
Acked-by: Lennert Buytenhek <redacted>

Re: [2.6 patch] EP93XX_ETH must select MII

From: Jeff Garzik <hidden>
Date: 2007-07-16 22:30:46

Adrian Bunk wrote:
From: John Donoghue <redacted>

CONFIG_EP93XX_ETH=y, CONFIG_MII=n results in an obvious link error.

Signed-off-by: Adrian Bunk <redacted>
applied

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help