[PATCH] sundance: PHY address form 0, only for device ID 0x0200 (IP100A) (20070605)
From: Jesse Huang <hidden>
Date: 2007-06-05 01:54:50
Also in:
lkml
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Jesse Huang <redacted> Change Logs: Search PHY address form 0, only for device ID 0x0200 (IP100A). Other device are from PHY address 1. Signed-off-by: Jesse Huang <redacted> --- drivers/net/sundance.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) a093fe5e3e7b9f58458171e481b5096cc1d3abfe
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e1f912d..23d049d 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c@@ -562,7 +562,11 @@ #endif * It seems some phys doesn't deal well with address 0 being accessed * first, so leave address zero to the end of the loop (32 & 31). */ - for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) { + if(sundance_pci_tbl[np->chip_id].device == 0x0200) + phy = 0; + else + phy = 1; + for (; phy <= 32 && phy_idx < MII_CNT; phy++) { int phyx = phy & 0x1f; int mii_status = mdio_read(dev, phyx, MII_BMSR); if (mii_status != 0xffff && mii_status != 0x0000) {
--
1.3.GIT