DORMANTno replies

[patch] bugfixes and new hardware support for arcnet driver

From: Jeff Morrow <hidden>
Date: 2007-02-09 01:15:53
Also in: lkml

The modifications and bug fixes noted below were done by Realtime
Control Works and Contemporary Control Systems, Inc, Jan 2005.  They
were incorporated into the 2.6 kernel by Jeff Morrow of Sierra
Analytics, Feb 2007.  [off-list ref]

The changes have been tested on a Contemporary Controls PCI20U-4000.

Summary of changes:

Arc-rawmode.c:
      rx():
      - Fixed error in received packet lengths; 256 byte packets were
        being received as 257 bytes packets.

      prepare_tx():
      - Fixed error in transmit length calcs; 257 byte packets were being
        transmitted as 260 byte packets.

com20020.c:
      com20020_check():
      - We now load the SETUP2 register if the 'clockm' parameter is
        non-zero, instead of checking for ARC_CAN_10MBIT. The user is
        now responsible for whether or not SETUP2 is loaded.  If the
        clock multiplier is non-zero, this means that the user wants a
        baud rate greater than 2.5Mbps. This is not possible unless the
        SETUP2 register is present (COM20020D, or COM20022). So, we're
        relying on the user to be smart about what kind of chip he's
        dealing with...

com20020-pci.c
      - Added several entries to com20020pci_id_table[].

Signed-off-by: Jeff Morrow <redacted>

---
diff -uprN -X linux-source-2.6.18/Documentation/dontdiff 
linux-source-2.6.18/drivers/net/arcnet/arcnet.c 
linux-source-2.6.18.changed/drivers/net/arcnet/arcnet.c
--- linux-source-2.6.18/drivers/net/arcnet/arcnet.c     2006-09-19 
20:42:06.000000000 -0700
+++ linux-source-2.6.18.changed/drivers/net/arcnet/arcnet.c 
2007-02-08 16:40:50.000000000 -0800
@@ -41,7 +41,7 @@
   *     <jojo@repas.de>
   */

-#define VERSION "arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et 
al.\n"
+#define VERSION "arcnet: v3.94 BETA 2006/02/08 - by Avery Pennarun et 
al.\n"

  #include <linux/module.h>
  #include <linux/types.h>
diff -uprN -X linux-source-2.6.18/Documentation/dontdiff 
linux-source-2.6.18/drivers/net/arcnet/arc-rawmode.c 
linux-source-2.6.18.changed/drivers/net/arcnet/arc-rawmode.c
--- linux-source-2.6.18/drivers/net/arcnet/arc-rawmode.c 
2006-09-19 20:42:06.000000000 -0700
+++ linux-source-2.6.18.changed/drivers/net/arcnet/arc-rawmode.c 
2007-02-08 16:28:29.000000000 -0800
@@ -94,7 +94,7 @@ static void rx(struct net_device *dev, i

         BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);

-       if (length >= MinTU)
+       if (length > MTU)
                 ofs = 512 - length;
         else
                 ofs = 256 - length;
@@ -183,7 +183,7 @@ static int prepare_tx(struct net_device
                        length, XMTU);
                 length = XMTU;
         }
-       if (length > MinTU) {
+       if (length >= MinTU) {
                 hard->offset[0] = 0;
                 hard->offset[1] = ofs = 512 - length;
         } else if (length > MTU) {
diff -uprN -X linux-source-2.6.18/Documentation/dontdiff 
linux-source-2.6.18/drivers/net/arcnet/com20020.c 
linux-source-2.6.18.changed/drivers/net/arcnet/com20020.c
--- linux-source-2.6.18/drivers/net/arcnet/com20020.c   2006-09-19 
20:42:06.000000000 -0700
+++ linux-source-2.6.18.changed/drivers/net/arcnet/com20020.c 
2007-02-08 16:39:40.000000000 -0800
@@ -104,7 +104,7 @@ int com20020_check(struct net_device *de
         SET_SUBADR(SUB_SETUP1);
         outb(lp->setup, _XREG);

-       if (lp->card_flags & ARC_CAN_10MBIT)
+        if (lp->clockm != 0)
         {
                 SET_SUBADR(SUB_SETUP2);
                 outb(lp->setup2, _XREG);
diff -uprN -X linux-source-2.6.18/Documentation/dontdiff 
linux-source-2.6.18/drivers/net/arcnet/com20020-pci.c 
linux-source-2.6.18.changed/drivers/net/arcnet/com20020-pci.c
--- linux-source-2.6.18/drivers/net/arcnet/com20020-pci.c 
2006-09-19 20:42:06.000000000 -0700
+++ linux-source-2.6.18.changed/drivers/net/arcnet/com20020-pci.c 
2007-02-08 16:24:27.000000000 -0800
@@ -155,6 +155,7 @@ static struct pci_device_id com20020pci_
         { 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
         { 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
         { 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT },
+        { 0x1571, 0xa00e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         { 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         { 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         { 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
@@ -162,6 +163,8 @@ static struct pci_device_id com20020pci_
         { 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         { 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         { 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+       { 0x14BA, 0x6000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
+       { 0x10B5, 0x2200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT },
         {0,}
  };
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help