[patch 05/14] e1000: Fix Wake-on-Lan with forced gigabit speed
From: Arjan van de Ven <hidden>
Date: 2006-12-15 10:01:05
Subject: e1000: Fix Wake-on-Lan with forced gigabit speed From: Jesse Brandeburg <redacted> If the user has forced gigabit speed, phy power management must be disabled; otherwise the NIC would try to negotiate to a linkspeed of 10/100 mbit on shutdown, which would lead to a total loss of link. This loss of link breaks Wake-on-Lan and IPMI. Signed-off-by: Jesse Brandeburg <redacted> Signed-off-by: Auke Kok <redacted> Signed-off-by: Arjan van de Ven <redacted> --- drivers/net/e1000/e1000_main.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) Index: linux-2.6/drivers/net/e1000/e1000_main.c ===================================================================
--- linux-2.6.orig/drivers/net/e1000/e1000_main.c
+++ linux-2.6/drivers/net/e1000/e1000_main.c@@ -732,6 +732,20 @@ e1000_reset(struct e1000_adapter *adapte if (e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); e1000_update_mng_vlan(adapter); + + /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */ + if (adapter->hw.mac_type >= e1000_82544 && + adapter->hw.mac_type <= e1000_82547_rev_2 && + adapter->hw.autoneg == 1 && + adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) { + uint32_t ctrl = E1000_READ_REG(&adapter->hw, CTRL); + /* clear phy power management bit if we are in gig only mode, + * which if enabled will attempt negotiation to 100Mb, which + * can cause a loss of link at power off or driver unload */ + ctrl &= ~E1000_CTRL_SWDPIN3; + E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); + } + /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);