Re: eepro100/e100 broken in 2.6.13-rc3

2 messages, 2 authors, 2005-07-14 · open the first message on its own page

Re: eepro100/e100 broken in 2.6.13-rc3

From: Jesse Brandeburg <hidden>
Date: 2005-07-14 06:29:14

On 7/13/05, Mikhail Kshevetskiy [off-list ref] wrote:
symptom
=======
modprobe e100
ifconfig eth0 <ip> netmask <netmask>

result:
=======
SIOCADDRT: Network is unreachable

There were no such error in 2.6.13-rc2
odd, both e100 and eepro100 are broken?  This might indicate something
wierd with the pci layer.  Don't know what might cause the Network is
unreachable...

please send lspci -vvv of the e100 device in question and any output from dmesg

added netdev in case someone has an idea there.

Re: eepro100/e100 broken in 2.6.13-rc3

From: Grant Coady <hidden>
Date: 2005-07-14 07:27:16

On Wed, 13 Jul 2005 23:28:15 -0700, Jesse Brandeburg [off-list ref] wrote:
On 7/13/05, Mikhail Kshevetskiy [off-list ref] wrote:
quoted
symptom
=======
modprobe e100
ifconfig eth0 <ip> netmask <netmask>

result:
=======
SIOCADDRT: Network is unreachable

There were no such error in 2.6.13-rc2
peetoo:~$ uname -r
2.6.13-rc3-a
peetoo:~$ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0d.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0e.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
peetoo:~$ lsmod
Module                  Size  Used by
adm9240                16056  0
i2c_sensor              2816  1 adm9240
radio_aztech            4316  0
nfsd                   92296  5
exportfs                4576  1 nfsd
tulip                  42496  0
e100                   30656  0
usb_storage            30276  0
peetoo:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:90:27:58:EC:6F
          inet addr:192.168.1.24  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3454075 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1759340 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:826224238 (787.9 Mb)  TX bytes:99642515 (95.0 Mb)

eth1      Link encap:Ethernet  HWaddr 00:04:AC:F3:4B:84
          inet addr:192.168.3.24  Bcast:192.168.3.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth2      Link encap:Ethernet  HWaddr 00:00:E8:4A:A0:C8
          inet addr:192.168.4.24  Bcast:192.168.4.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:5 Base address:0x8000

Not broken here :)
--Grant.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help