[Fwd: Re: 2.6.11-rc3-mm2] - skge

I'm forwarding what I've sent to LKML, but probably this is the best place.

Please, cc if you have replies, I'm not subscribed to the list.

Bye all.


-------- Original Message --------
Subject: Re: 2.6.11-rc3-mm2
Date: Mon, 14 Feb 2005 14:22:29 +0100
From: Stefano Rivoir <redacted>
To: Andrew Morton <redacted>
CC: linux-kernel@vger.kernel.org
References: [off-list ref]

Alle 11:35, giovedì 10 febbraio 2005, Andrew Morton ha scritto:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc3/2.
6.11-rc3-mm2/

I was trying to use the skge module for my Intel 3c940 card, in place of 
the
(working) sk98lin.

It gives the following:

Feb 14 14:16:35 nbsteu kernel: kobject_register failed for skge (-17)
Feb 14 14:16:35 nbsteu kernel:  [kobject_register+81/96]
kobject_register+0x51/0x60
Feb 14 14:16:35 nbsteu kernel:  [bus_add_driver+82/192]
bus_add_driver+0x52/0xc0
Feb 14 14:16:35 nbsteu kernel:  [driver_register+40/48]
driver_register+0x28/0x30
Feb 14 14:16:35 nbsteu kernel:  [pci_register_driver+94/128]
pci_register_driver+0x5e/0x80
Feb 14 14:16:35 nbsteu kernel:  [sys_init_module+313/480]
sys_init_module+0x139/0x1e0
Feb 14 14:16:35 nbsteu kernel:  [sysenter_past_esp+82/117]
sysenter_past_esp+0x52/0x75

Attached, .config and lspci -v

-- 
Stefano Rivoir


-- 
Stefano RIVOIR
GTS Srl