On Wed, 25 Jul 2007 22:22:41 +0200
"Torsten Kaiser" [off-list ref] wrote:

On 7/25/07, Torsten Kaiser [off-list ref] wrote:

quoted

I hit something similar:

  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `acpi_pci_choose_state':
drivers/pci/pci-acpi.c:253: undefined reference to `acpi_pm_device_sleep_state'
drivers/built-in.o: In function `pnpacpi_suspend':
drivers/pnp/pnpacpi/core.c:124: undefined reference to
`acpi_pm_device_sleep_state'
make: *** [.tmp_vmlinux1] Error 1

I also have CONFIG_SMP=y and CONFIG_HOTPLUG_CPU=n

Will try to investigate more...

Removing (!SMP || SUSPEND_SMP) from the depends of ACPI_SLEEP and
activation this option lets me build the kernel.

Yes, I'm trying to hunt down a fix for that.  Apparently it got repaired in
the acpi pull which Linus just did.

Maybe your fix is suitable?

But it does not boot:

argh.

[    0.000000] Linux version 2.6.23-rc1-mm1 (root@treogen) (gcc
version 4.2.0 (Gentoo 4.2.0 p1.4)) #3 SMP Wed Jul 25 21:18:44 CEST
2007
[    0.000000] Command line: earlyprintk=serial,ttyS0,38400
console=ttyS0,38400 console=tty1 crypt_root=/dev/md1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[    0.000000]  BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] console [earlyser0] enabled
[    0.000000] end_pfn_map = 1179648
kernel direct mapping tables up to 120000000 @ 8000-e000
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000FB5E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT DFFF0000, 003C (r1 A M I  OEMRSDT   6000626
MSFT       97)
[    0.000000] ACPI: FACP DFFF0200, 0084 (r2 A M I  OEMFACP   6000626
MSFT       97)
[    0.000000] ACPI: DSDT DFFF0450, 48E1 (r1  S0027 S0027000        0
INTL 20051117)
[    0.000000] ACPI: FACS DFFFE000, 0040
[    0.000000] ACPI: APIC DFFF0390, 0080 (r1 A M I  OEMAPIC   6000626
MSFT       97)
[    0.000000] ACPI: MCFG DFFF0410, 003C (r1 A M I  OEMMCFG   6000626
MSFT       97)
[    0.000000] ACPI: OEMB DFFFE040, 0060 (r1 A M I  AMI_OEM   6000626
MSFT       97)
[    0.000000] ACPI: SRAT DFFF4D40, 0110 (r1 AMD    HAMMER          1
AMD         1)
[    0.000000] ACPI: SSDT DFFF4E50, 04F0 (r1 A M I  ACPI2PPC        1
AMI         1)
[    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 0-80000000
[    0.000000] SRAT: Node 1 PXM 1 80000000-e0000000
[    0.000000] SRAT: Node 1 PXM 1 80000000-120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000] Bootmem setup node 1 0000000080000000-0000000120000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1179648
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   524288
[    0.000000]     1:   524288 ->   917488
[    0.000000]     1:  1048576 ->  1179648
PANIC: early exception rip ffffffff807caac5 error 2 cr2 ffffe20003000010
[    0.000000]
[    0.000000] Call Trace:

... but no Call Trace follows.

(gdb) list *0xffffffff807caac5
0xffffffff807caac5 is in memmap_init_zone (include/linux/list.h:32).
27      #define LIST_HEAD(name) \
28              struct list_head name = LIST_HEAD_INIT(name)
29
30      static inline void INIT_LIST_HEAD(struct list_head *list)
31      {
32              list->next = list;
33              list->prev = list;
34      }
35
36      /*

Torsten

Quite a few people have been playing in that area.  Can you please send the
.config?